Ninthore Overseas is one of the leading Manufacturer And Exporter of High Quality Stainless Steel 304L Coils, Plates, Sheets, which is more resistant to carbide precipitation and can be used in the above temperature range. Our Stainless Steel 304L Sheets is second most common grade (after 304); for food and surgical stainless steel uses; alloy addition of molybdenum prevents specific forms of corrosion. These Stainless Steel 304L Plates is also known as marine grade stainless steel due to its increased resistance to chloride corrosion compared to type 304. Solution Treatment (Annealing) – Heat of Stainless Steel 304L Coils is up to 1010 Degree C – 1120 Degree C and cool rapidly, which further cannot be hardened by thermal treatment.

Stainless Steel 304L Coils Manufacturer In India | Stainless Steel 304L Coils Manufacturer In Mumbai | Stainless Steel 304L Coils Exporter In India | Stainless Steel 304L Coils Exporter In Mumbai | Stainless Steel 304L Coils Supplier In India | Stainless Steel 304L Coils Supplier In Mumbai | Stainless Steel 304L Coils Stockist In India| Stainless Steel 304L Coils Stockist In Mumbai

Of course, there are many industrial processes for these Stainless Steel 304L Slating Coils that require a higher level of resistance to corrosion. Our Stainless Steel 304L Perforated Coils is commonly used in many industrial applications involving processing chemicals, as well as high – saline environments such as coastal regions and outdoor areas where de – icing salts are common.

The carbon content in these SS 304L Sheets is held to 0.08 % maximum, while the nickel content is increased slightly. Due to its non – reactive qualities, our SS 304L Plates is also used in the manufacture of medical surgical instruments. These SS 304L Coils have chemical and mechanical properties complying with both 316 and 316L specifications.

Stainless Steel 304L Sheet, Plate & Coil Specifications
Specifications : ASTM A240 / ASME SA240
Thickness : 4mm-100mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
SS 304L Plate, Sheet & Coil Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.035 max 2 max 1.0 max 0.045 max 0.030 max 18 – 20 8 – 13
Stainless Steel 304L Sheets, Plates & Coils Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Grades for 304L Stainless Steel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304L Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 304L Sheets, Plate & Coils Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 304L Coils

Ninthore Overseas is one of the leading Manufacturer And Exporter of High Quality Stainless Steel 304L Coils, Plates, Sheets, which is more resistant to carbide precipitation and can be used in the above temperature range.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US