Ninthore Overseas is one of the Leading Manufacturer And Exporter of High Quality Inconel 601 Sheet, which are extensively appropriate for dissimilar purposes in dissimilar industries. Inconel 601 Plates is useful for chemical progression machinery such as process heaters, condenser tubes and combustor components. Inconel 601 Coils has been effectively used in the following uses, such as annealing, sintering muffles, retorts and copper brazing. Inconel 601 Slating Coils has excellent resistance to aqueous corrosion. Inconel 601 Perforated Coils has excellent hot corrosion resistance under oxidizing environments.

Alloy 601 Coils stands out because of its resistance to soaring temperature oxidation, where we also offer the same at industry leading prices. Alloy 601 Slating Coils has excellent oxidation resistance and also has good resistance to carburizing but should not be used in atmospheres containing sulfur content. Alloy 601 Perforated Coils must be cooled as rapidly as possible through the range 1400 Degree F to 1000 Degree F. Nickel-Alloy 601 Sheets is often used for thermal reactors in exhaust system of petrol engines.

Inconel 601 Sheet | Inconel 601 Sheet | Inconel 601 Sheet | Inconel 601 Sheet | Inconel 601 Sheet | Inconel 601 Sheet

Nickel-Alloy 601 Plates is also used for combustor components and catalyst grid supports in equipment for nitric acid production. These Nickel-Alloy 601 Coils are also used in baskets, trays, and fixtures for heat – treating equipment. Heavy lubricants Inconel UNS N06601 Sheets Plates are used for tapping, boring, broaching or drilling. Meanwhile, these Alloy 601 Plates are also being offered in different sizes and shapes to our customers.

Inconel 601 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 168
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Inconel 601 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0

Alloy 601 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 601 Inconel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 601 2.4851 N06601 NCF 601 NA 49 XH60BT NC23FeA NiCr23Fe

Inconel 601 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 601 Sheets, Plate & Coils Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 601 Sheet

Ninthore Overseas is one of the Leading Manufacturer And Exporter of High Quality Inconel 601 Sheet, which are extensively appropriate for dissimilar purposes in dissimilar industries.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5