Ninthore Overseas is one of the Leading Manufacturer And Exporter of Stainless Steel 304L Flanges, which is a molybdenum bearing and low carbon content “l” grade austenitic stainless steel that provides improved corrosion resistance. The low carbon in Stainless Steel 304L Slip On Flanges provides resistance to sensitization during welding and other thermal processes. Stainless Steel 304L Threaded Flanges is non – magnetic in the annealed condition but may become slightly magnetic as a result of welding. Stainless Steel 304L Weld Neck Flanges have excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills.

Stainless Steel 304L Blind Flanges is resistant to sulphuric acid concentrations up to five percent at temperatures as high as 120 Degree f (49 Degree c) at temperatures under 100 Degree f (38 Degree c). Stainless Steel UNS S30403 Socket Weld Flanges has excellent resistance to solutions of higher concentration. Stainless Steel 304L Lap Joint Flanges are slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum. 

Stainless Steel 304L Flanges | Stainless Steel 304L Flanges | Stainless Steel 304L Flanges | Stainless Steel 304L Flanges | Stainless Steel 304L Flanges | Stainless Steel 304L Flanges | Stainless Steel 304L Flanges | Stainless Steel 304L Flanges

Stainless Steel 304L Ring Joint Type Flanges does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. The machinability of Stainless Steel 304L Spectacle Blind Flanges is difficult as it work-hardens during machining. The conventional machining techniques used on iron alloys may be used for Stainless Steel 304L Nippon Flanges

Stainless Steel 304L Pipe Flanges Specifications
Specifications : ASTM A182 / ASME SA182
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

SS 304L Pipe Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.035 max 2 max 1.0 max 0.045 max 0.030 max 18 – 20 8 – 13

Stainless Steel 304L Plate Flanges Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304L Stainless Steel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11

SS 304L Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 304L Pipe Flanges Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 304L Flanges

Ninthore Overseas is one of the Leading Manufacturer And Exporter of Stainless Steel 304L Flanges, which is a molybdenum bearing and low carbon content “l” grade austenitic stainless steel that provides improved corrosion resistance.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5