Ninthore Overseas is one of the Leading Manufacturer And Exporter Stainless Steel 316 Flanges, which performs well in boiling 20 % phosphoric acid. Our Stainless Steel 316 Slip On Flanges can also be used in the food and pharmaceutical process industries where it is utilized to handle hot organic and fatty acids in an effort to minimize product contamination. These Stainless Steel 316L Threaded Flanges performs well in fresh water service even with high levels of chlorides. In most instances, the corrosion resistance of our Stainless Steel 316 Weld Neck Flanges will be roughly equal in most corrosive environments.

However, in environments that are sufficiently corrosive to cause intergranular corrosion of welds and heat – affected zones, these Stainless Steel UNS S31600 / S31603 Blind Flanges should be used for the reason that of its low carbon content. Our Stainless Steel 316 Socket Weld Flanges can be easily welded and processed by standard shop fabrication practices. Forming working temperatures of 1700 Degree F – 2200 Degree F (927 Degree – 1204 Degree C) are recommended in these Stainless Steel 316L Lap Joint Flanges for most hot working processes.

Stainless Steel 316 Flanges | Stainless Steel 316 Flanges | Stainless Steel 316 Flanges | Stainless Steel 316 Flanges | Stainless Steel 316 Flanges | Stainless Steel 316 Flanges | Stainless Steel 316 Flanges | Stainless Steel 316 Flanges 

Our Stainless Steel 316 Ring Joint Type Flanges is quite ductile and forms easily, which is subject to work hardening during deformation and is subject to chip breaking. Cold working operations will increase the strength and hardness of these Stainless Steel 316L Spectacle Blind Flanges and might leave it slightly magnetic.

Stainless Steel 316 / 316L Pipe Flanges Specifications
Specifications : ASTM A182 / ASME SA182
Size : 1/2″ (15 NB) to 48″ (1200NB)
Standards
: ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Class / Pressure : 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standard : ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.

SS 316 / 316L Pipe Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 316 0.08 max 2 max 1.0 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 11.00 – 14.00 67.845 min
SS 316L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.89 min

Stainless Steel 316 / 316L Plate Flanges Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
SS 316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316 / 316L Stainless Steel Industrial Pipe Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

SS 316 / 316L Flanges Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 316 / 316L Pipe Flanges Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 316 Flanges

Ninthore Overseas is one of the Leading Manufacturer And Exporter Stainless Steel 316 Flanges, which performs well in boiling 20 % phosphoric acid.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5