Ninthore Overseas is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 321 Coils, Sheets Plates, which responds well to hardening by cold working. The amount of titanium content required in Stainless Steel 321 Sheets is indicative of the product percentage of carbon. Stainless Steel 321 Plates is generally used for parts which are intermittently heated up to 1500 Deg F along with for continuous service the alloy is good to 1650 Deg F. The high corrosion resistance of Stainless Steel 321 Coils is based on the formation of a homogeneous, compact passive layer on the surface.

Stainless Steel 321H Sheets has good welding characteristics; and post-weld annealing is not normally required to restore its excellent performance in a wide range of corrosive conditions. Stainless Steel 321H Plates is used because they are not sensitive to intergranular corrosion after heating within the carbide precipitation range of 425-850°C.

Stainless Steel 321 Coils Manufacturer In India | Stainless Steel 321 Coils Manufacturer In Mumbai | Stainless Steel 321 Coils Exporter In India | Stainless Steel 321 Coils Exporter In Mumbai| Stainless Steel 321 Coils Supplier In India | Stainless Steel 321 Coils Supplier In Mumbai | Stainless Steel 321 Coils Stockist In India | Stainless Steel 321 Coils Stockist In Mumbai 

Stainless Steel 321H Coils is then quench-annealed as rapidly as possible generally in clean water, but thin sections can be air cooled, this being necessary to suppress any re-formation of chromium carbide which would occur if the material was allowed to slow cool in the furnace etc. as with standard annealing procedures. Stainless Steel 321H Slating Coils is a stabilized austenitic stainless steel similar to Type 304 but with a titanium addition of at least five times the carbon content.

Stainless Steel 321/321H Sheet, Plate & Coil Specifications
Specifications : ASTM A240 / ASME SA240
Thickness : 4mm-100mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
SS 321/321H Plate, Sheet & Coil Chemical Composition
Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max
Stainless Steel 321/321H Sheets, Plates & Coils Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Grades for 321/321H Stainless Steel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9
SS 321/321H Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 321/321H Sheets, Plate & Coils Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 321 Coils

Ninthore Overseas is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 321 Coils, Sheets Plates, which responds well to hardening by cold working. The amount of titanium content required in Stainless Steel 321 Sheets is indicative of the product percentage of carbon.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Ninthore Overseas manufactures and supplies superior quality stainless steel coils to local as well as international markets. We offer stainless steel 321 coils in different sizes, specifications, thickness and dimensions as per your requirements. Stainless steel coils are used in different industries as we provide thickness and dimensions as per the requirements of the patrons. The standard grades of stainless steel coil available are 200 series stainless steel coil, 300 series stainless steel coil, 400 series stainless steel coil, 600 series stainless steel coil. We offer a wide range of stainless steel coils.

They are strong, resist corrosion, are light in weight and require low maintenance. Also, they are flexible and easily meet the requirements of a range of design criteria. Within the industry (especially manufacturing), you can find numerous grades of stainless steel coils, each with different properties and usability.

stainless steel 321 coils

Features of stainless steel 321 coils

  • Stainless Steel Coils have excellent surface finish.
  • There are multiple diameters available in SS Coils.
  • Steel Coils are rust resistant.
  • These Coils are resistant to corrosion.
  • SS Coils show high sturdiness.
  • They have a conventional design.
  • Steel Coils are Qualitative in nature.
  • SS Coils are reasonable.
  • Our provided Coils are of varied specifications.
  • SS coil are tensile.
  • We provide stainless steel Coils with high life-expectancy.
  • The Coils are dynamic in nature.
  • Stainless Steel Coils are dependable.
  • SS Coils are imperviable.
  • They are resilient.
  • SS Coils are endurable.
  • SS coil withstands easily at the greater temperature and heavy loads.

Stainless Steel 321 Coils uses

Stainless steel 321 coils have its applications in various industries such as engineering industry, construction industry, machining industry and manufacturing industry. Hence these applications are different depending on the sizes of the coils. The application or use of stainless steel 321 coils are in construction industry in the form of base plates and brackets. Coils are also used in Furniture, Architectural applications, Pharma industry, Paper and Pulp, Oil and Gas, Petroleum, Precision Engineering, Handrails, Engineering industries, Kitchen equipments, structural use for High Strength components, Handles and Sanitary wares. The ASTM A240 Stainless Steel 200 series coil is used in manufacturing aerospace products, medical equipments, heat exchangers, etc.

Stainless steel 321 coils applications

We offer premium quality stainless steel 321 coils in different sizes, and standards as per your requirement. Our stainless steel 321 coils are manufactured by advanced techniques and these coils are used in many manufacturing and other industries.

  • Oil & gas industry
  • Petrochemical Industry
  • Fertilizers Industry
  • Chemical Industry
  • Refineries Industry
  • Nuclear Power Plant Industry
  • Aerospace Industry
  • Stainless steel 321 coils are also used in Tractor, Automotive Trim, Stamped Machined Products, Cookware, Appliances, Trailers, Sinks, Railway Cars, Kitchen, Foodservice Equipment and many more.

Product Specification

Ninthore Overseas specializes in production and distribution of stainless steel coils. It can be provided in wide range of size and grades. Sizes of these coils range from 2 x 10mm to 100 x 1000mm. Stainless Steel 321 coils are supplied in different grades ranging from 321 to 347H. Customised lengths of Stainless Steel 321 coils are also available according to your requirements. We offer all the non – standard sizes and different grades stainless steel coil.

The surface and finish of our coils are 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checker, emboss, hair line, sand blast, Brush, etching, etc. The standard coils available are ASTM A 240, JIS4321-2005, ASTM A167, EN10088-2-2005, GB/T3280-2007, etc. We manufacture the coils by hot rolled and cold rolled technique. We ensure that the products are not damaged while transportation and hence, we use standard export packaging method.

Product Services

Owing to our rich experience and knowledge, we are supplying a wide range of 321 Stainless Steel Coil. These products are supplied in various sizes, dimensions and thicknesses, so as to cater to the various requirements of customers. It is admired in the industry for its durability, abrasion free feature, sturdy construction and corrosion resistance. The 321 Stainless Steel Coil products are used in construction, refineries, general engineering and several other industries.

In addition to this, our renowned clients can avail these 321 Stainless Steel Coil products in various sizes and shapes at rock bottom prices. Our collection of 321 Stainless Steel Coil is applauded by the mechanical and automobile industries for assisting several needs of production area. These precisely engineered coils are made by pure stainless steel and quality approved by deep experience holding professionals. These 321 Stainless Steel Coil are reliable in working and completely safe from heat and pressure.

Stainless Steel 321 Coils manufacturers in India

Ninthore Overseas is a leading Stainless Steel 321 coils manufacturers in India. We are manufacturers of premium quality range of stainless steel 321 coils. These coils are manufactured under the expert guidance and diligent workforce to make our products reliable. Our rigorous quality check at all stages of manufacturing ensures the quality of our products as per international quality standards. We are leading manufacturers of 321 coils.

SS 321 coils Suppliers in India

Ninthore Overseas is a leading SS 321 coils Suppliers in India. We are suppliers of premium quality range of stainless steel 321 coils. These coils are manufactured under the expert guidance and diligent workforce to make our products reliable. Our rigorous quality check at all stages of manufacturing ensures the quality of our products as per international quality standards. We are leading supplier of SS 321 coils.

SS 321 coils stockist in India

Ninthore Overseas is a leading SS 321 coils stockist in India. We are stockist of premium quality range of stainless steel 321 coils. These coils are manufactured under the expert guidance and diligent workforce to make our products reliable. Our rigorous quality check at all stages of manufacturing ensures the quality of our products as per international quality standards. We are leading stockist of SS 321 coils.

Stainless Steel 321 Coils Testings

Ninthore Overseas  is familiar for the quality assurance we provide to our clients. Our products are quality assured by undergoing manufacturing and heat treatment techniques. These analysis assures the reliability, dependability and suitability of the coils for its specific end use.

  • Spectra Analyzer
  • Micro hardness tester
  • Hardness tester
  • Chemical analysis
  • Universal testing machine
  • PMI Testing
  • Cupping tester
  • Rockwell Brinell Hardness Tester
  • Surface roughness tester
  • IGC Testing
  • Iron tester, Ph tester
  • Metallurgical microscope

These analysis assures the reliability, dependability and suitability of the coils for its specific end use. The quality of the stainless steel 321 coil makes it competitive not only in India but also in the foreign markets.

Specifications

Items Stainless Steel 321 Coils
Standard ASTM A 240, JIS4321-2005, ASTM A167, EN10088-2-2005, GB/T3280-2007, etc.
Thickness 0.3 mm – 10 mm
Width 1 m, 1.219 m, 1.5 m, 1.8 m, 2 m, 2.5 m, 3 m, 3.5 m, 4 m, etc.
Length 2 m, 2.44 m, 3 m, 5.8 m, 6 m.
Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checker, emboss, hair line, sand blast, Brush, etching, etc.
Packaging Shrink-wrapped, Carton boxes, Wooden pallets, Wooden boxes, Wooden crates, etc.

Chemical Compositions

Grade Stainless Steel 321 Coils
Chromium 16-18%
Nickel 3.5-5.5%
Carbon  0.150%
Manganese 5.5-7.5%
Silicon 1.000%
Sulfur 0.030%
Phosphorous 0.060%
Nitrogen 0.250%

Mechanical Properties

Properties Metric Imperial Annealed
Tensile 685 MPa 99400 psi 75000 min psi
Yield 292 MPa 42400 psi 38000 min psi
Elongation 62.50 % 62.50 % 40 min %
Hardness 85 Rb 85 Rb 95 max Rb

Physical Properties

Grade Stainless Steel 321 Coils
Melting Range (F) 2250 – 2950
Density (lb / in) 0.2850
Specific Gravity 8.03
Elasticity in Tension 28 * 106 psi

Value Added Services

  • Cladding
  • Heat Treatment
  • Annealed
  • Pickling
  • Polish
  • Rolling
  • Cutting
  • Bending
  • Forging
  • Minor Fabrication 

Related Searches

Popular Searches

stainless steel coils, stainless steel coils manufacturers in india, stainless steel coils supplier, stainless steel coils suppliers, stainless steel coils manufacturers, prebuilt stainless steel coils, jindal stainless steel coils, best temp for stainless steel coils, stainless steel coils india, are stainless steel coils safe, secondary stainless steel coils, stainless steel coils vs kanthal, how to build stainless steel coils, stainless steel coils temp control, how to clean stainless steel coils, stainless steel coils temperature control, why use stainless steel coils, how to wrap stainless steel coils, tanks with stainless steel coils, nichrome vs stainless steel coils, best temperature for stainless steel coils, can you run stainless steel coils in wattage mode, stainless steel coils for vaping, how to use stainless steel coils, stainless steel coils safe.

Categories: