Contents
- 0.1 Inconel 718 Round Bar Manufacturer In India | Inconel 718 Round Bar Manufacturer In Mumbai | Inconel 718 Round Bar Exporter In India | Inconel 718 Round Bar Exporter In Mumbai | Inconel 718 Round Bar Supplier In India | Inconel 718 Round Bar Supplier In Mumbai | Inconel 718 Round Bar Stockist In India | Inconel 718 Round Bar Stockist In Mumbai
- 0.2 Inconel 718 Round Bar Specifications
- 0.3 718 Inconel Round Bar Chemical Composition
- 0.4 Inconel Alloy 718 Rods Mechanical Properties
- 0.5 Equivalent Grades for 718 Inconel Round Bar
- 0.6 Inconel 718 Round Bar Application Industries
- 0.7 718 Inconel Rods Test Certificates
- 0.8 We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
- 0.9 Material Testing
- 0.10 We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
- 0.11 Documentation
- 1 Inconel 718 Round Bars
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Round Bars, where the age – hardened condition gives better chip action on chip breaker tools and produces a better finish. Inconel 718 Square Bars accounts for up to 50 % of the weight of aircraft turbojet engines, being the main component for discs, blades and casing of the high
Inconel 718 Round Bar Manufacturer In India | Inconel 718 Round Bar Manufacturer In Mumbai | Inconel 718 Round Bar Exporter In India | Inconel 718 Round Bar Exporter In Mumbai | Inconel 718 Round Bar Supplier In India | Inconel 718 Round Bar Supplier In Mumbai | Inconel 718 Round Bar Stockist In India | Inconel 718 Round Bar Stockist In Mumbai
Inconel 718 Round Bars
pressure section of the compressor and discs as well as some blades of the turbine section. The precipitation of this nickel – (aluminum, titanium, and niobium) phases in Inconel 718 Flat Bars is induced by heat treating in the temperature range of 1100 Degree F to 1500 Degree F.
This is the preferred treatment in tensile – limited applications for Inconel 718 Threaded Bars as it produces the best transverse ductility in heavy sections, impact strength and low temperature notch tensile strength. Common Applications of Inconel 718 Hollow Bars: Jet engine components, Oil & gas, and Gas turbine operations. Inconel 718 Hexagonal Bars has good mechanical properties – tensile, fatigue and creep – rupture.
Inconel 718 Triangular Bars is often used in aerospace, rocket motors, space shuttles, spacecraft, nuclear reactors, turbo pump seals, tooling and pumps. Inconel 718 Bars has excellent weldability when compared to the nickel – base super alloys hardened by aluminum and titanium. The results indicated that the fine – grained ring forgings can be obtained by forging the fine – grained Inconel 718 Rods.
Inconel 718 Round Bar Specifications |
||
| Specifications | : | ASTM B166 / ASTM SB166 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
718 Inconel Round Bar Chemical Composition
| Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Inconel 625 | 0.08 max | 0.35 max | 0.35 max | 0.30 max | 0.15 min | – | – | 50.0-55.0 min | 17.0–21.0 |
Inconel Alloy 718 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.2 g/cm3 | 1.350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Equivalent Grades for 718 Inconel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 718 | 2.4668 | N07718 | NCF 718 | – | – | – | – |
Inconel 718 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
718 Inconel Rods Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Inconel 718 Round Bars
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Inconel 718 Round Bars, where the age – hardened condition gives better chip action on chip breaker tools and produces a better finish.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments