Contents
- 1 Monel K500 Round Bar Specifications
- 1.1 K500 Monel Alloy Round Bar Chemical Composition
- 1.2 Monel Alloy K500 Rods Mechanical Properties
- 1.3 Equivalent Grades for K500 Monel Round Bar
- 1.4 Monel K500 Round Bar Application Industries
- 1.5 K500 Monel Rods Test Certificates
- 1.6 Material Testing
- 1.7 We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
- 1.8 Documentation
- 2 Monel Alloy K500 Round Bars
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Round Bars, where we offer these products to our well – regarded clienteles in a number of designs. Monel K500 Square Bars combines the outstanding corrosion resistance attribute of Monel 400 Bars by means of the additional benefits of greater hardness and strength. Monel K500 Flat Bars is a nickel – copper precipitation – harden able alloy that syndicates corrosion resistance, non – magnetic and high strength properties. Monel K500 Threaded Bars is generally used in doctor blades, scrapers and pump components, cable wrap and oil well drill collars, marine instruments, springs, valve tray, submarine parts and electronic components.
Monel Alloy K500 Round Bars Manufacturer In India | Monel Alloy K500 Round Bars Manufacturer In Mumbai | Monel Alloy K500 Round Bars Exporter In India | Monel Alloy K500 Round Bars Exporter In Mumbai | Monel Alloy K500 Round Bars Supplier In India | Monel Alloy K500 Round Bars Supplier In Mumbai | Monel Alloy K500 Round Bars Stockist In India | Monel Alloy K500 Round Bars Stockist In Mumbai
Monel K500 Hollow Bars (UNS N05500) is effectively nonmagnetic, even at relatively low temperatures. Meanwhile, these Monel K500 Hexagonal Bars are also being offered in different sizes and shapes to our customers. The possession of this resistance to both general and localized corrosion under diverse conditions is what allows Monel K500 Triangular Bars to have a broad usefulness and wide range of applications.
Monel Alloy K500 Round Bars
Monel K500 Bars has good mechanical properties from moderately to high temperatures. Monel K500 Rods has good mechanical properties at both room and elevated temperatures up to approximately 1020 Degree F. Aiding resistance to pitting and crevice corrosion is one of the chief benefits of the molybdenum content in Alloy K500 Bars. We also offer these Alloy K500 Rods in customized sizes, shapes and designs to our clients at reasonable cost.
Monel K500 Round Bar Specifications |
||
| Specifications | : | ASTM B865 / ASTM SB865 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
K500 Monel Alloy Round Bar Chemical Composition
| Grade | C | Mn | Si | Cu | Fe | Ni | S |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min | 0.010 max |
Monel Alloy K500 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 1,60,000 , MPa – 1100 | Psi – 1,15000 , MPa – 790 | 20% |
Equivalent Grades for K500 Monel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | BS | AFNOR | EN |
| Monel K500 | 2.4375 | N05500 |
Monel K500 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
K500 Monel Rods Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Monel Alloy K500 Round Bars
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy K500 Round Bars, where we offer these products to our well – regarded clienteles in a number of designs. Monel K500 Square Bars combines the outstanding corrosion resistance attribute of Monel 400 Bars by means of the additional benefits of greater hardness and strength.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
0 Comments