Contents
- 0.1 Alloy Steel T5 Tubes Manufacturer In India | Alloy Steel T5 Tubes Manufacturer In Mumbai | Alloy Steel T5 Tubes Exporter In India | Alloy Steel T5 Tubes Exporter In Mumbai | Alloy Steel T5 Tubes Supplier In India | Alloy Steel T5 Tubes Supplier In Mumbai | Alloy Steel T5 Tubes Stockist In India | Alloy Steel T5 Tubes Stockist In Mumbai
- 0.2 Alloy Steel T5/T5b/T5c Seamless Tubes Specifications
- 0.3 T5/T5b/T5c Alloy Steel Tube Chemical Composition
- 0.4 Alloy Steel T5/T5b/T5c Tubes Mechanical Properties
- 0.5 Alloy Steel T5/T5b/T5c Seamless Tube Outside Diameter and Tolerance
- 0.6 Alloy Steel T5/T5b/T5c Seamless Tubes Application Industries
- 0.7 T5/T5b/T5c Alloy Steel A213 Tube Test Certificates
- 0.8 Material Testing
- 0.9 Documentation
- 1 Alloy Steel T5 Tubes
Ninthore Overseas is one Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel T5 Tubes, which can also be used interchangeably, based on application, where products that use acidified solutions can introduce a strong risk for corrosion. Major hot working in Alloy Steel T5 Seamless Tubes should be done between 2300 Degree F / 1850 Degree F, while light working may be continued as low as 1600 Degree F. No hot working in Alloy Steel T5 Welded Tubes should be attempted between 1600 Degree F / 1200 Degree F due to lower ductility in that range.
Alloy Steel T5 Tubes Manufacturer In India | Alloy Steel T5 Tubes Manufacturer In Mumbai | Alloy Steel T5 Tubes Exporter In India | Alloy Steel T5 Tubes Exporter In Mumbai | Alloy Steel T5 Tubes Supplier In India | Alloy Steel T5 Tubes Supplier In Mumbai | Alloy Steel T5 Tubes Stockist In India | Alloy Steel T5 Tubes Stockist In Mumbai
Alloy Steel T5 Tubes
Above this temperature in Alloy Steel T5 EFW Tubes, grain growth may be objectionable, although very brief heating at 1900 Degree F will cause complete softening without undue grain growth. For this reason, age – hardened alloys such as Alloy Steel T5 ERW Tubes are machined using an aggressive but slow cut with a hard tool, minimizing the number of passes required.
Alternatively, the majority of the machining in Alloy Steel T5 Round Tubes can be performed with the work – piece in a solution zed form, with only the final steps being performed after age hardening. The UNS number is covered by ASTM, ASME, ISO, DIN and other international standards, making Alloy Steel T5 Square Tubes available in many common product forms. Cold working of Alloy Steel T5 Rectangular Tubes at levels between 30 % and 65 % result in high room temperature yield strengths.
Alloy Steel T5/T5b/T5c Seamless Tubes Specifications |
||
| Specifications | : | ASTM A/ASME SA213, A691 |
| Dimensions | : | ASTM, ASME and API |
| Tubes Size |
: | 1 / 2” OD up to 5” OD, customs diameters also available |
| Outer Diameter | : | 6-2500mm; WT:1-200mm |
| Schedule | : | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Type | : | Seamless / EFW / Fabricated |
| Form | : | Round, Square, Rectangular, Hydraulic Etc |
| Length | : | Single Random, Double Random & Cut Length. |
| End | : | Plain End, Beveled End, Treaded |
T5/T5b/T5c Alloy Steel Tube Chemical Composition
|
Grade
|
C≤
|
Mn
|
P≤
|
S≤
|
Si≤
|
Mo
|
|---|---|---|---|---|---|---|
|
T5
|
0.15
|
0.30~0.60
|
0.025
|
0.025
|
1.0-2.0
|
0.45~0.65
|
|
T5b
|
0.15 max
|
0.30~0.60
|
0.025
|
0.025
|
1.0-2.0
|
0.45~0.65
|
|
T5c
|
0.12 max
|
0.30~0.60
|
0.025 max
|
0.025 max
|
0.50 max
|
0.45~0.65
|
Alloy Steel T5/T5b/T5c Tubes Mechanical Properties
| Grade | Tensile Strength, MPa | Yield Strength, MPa | Elongation, % | Hardness, HB |
| T5 | 415 min | 205 min | 30 min | 179 max |
| T5b | 415 min | 205 min | 30 min | 179 max |
| T5c | 415 min | 205 min | 30 min | 163 max |
Alloy Steel T5/T5b/T5c Seamless Tube Outside Diameter and Tolerance
| Outside Diameter | OD Tolerance | WT Tolerance | Ovality Tolerance | Cut Length Tolerance |
| OD≤ 12, 7 mm | ± 0, 13 mm | ± 15 % | – | + 3, 18 mm, – 0 mm |
| 12, 7 mm < OD ≤ 38, 1 mm | ± 0, 13 mm | ± 10 % | max, 1, 65 mm | + 3, 18 mm, – 0 mm |
| 38, 1 mm < OD ≤ 88, 9 mm | ± 0, 25 mm | ± 10 % | max, 2, 41 mm | + 4, 76 mm, – 0 mm |
Alloy Steel T5/T5b/T5c Seamless Tubes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
T5/T5b/T5c Alloy Steel A213 Tube Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Alloy Steel T5 Tubes
Ninthore Overseas is one Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel T5 Tubes, which can also be used interchangeably, based on application, where products that use acidified solutions can introduce a strong risk for corrosion. Major hot working in Alloy Steel T5 Seamless Tubes should be done between 2300 Degree F / 1850 Degree F, while light working may be continued as low as 1600 Degree F
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments