Contents
- 1 SS 310/310S Wiremesh Specifications
- 2 310/310S Stainless Steel Wire Mesh Chemical Composition
- 3 Stainless Steel 310S Wiremesh Mechanical Properties
- 4 Equivalent Grades for 310S Stainless Steel Wiremesh
- 5 SS 310/310S Wire Mesh Application Industries
- 6 310/310S Steel Wiremesh Test Certificates
- 7 Material Testing
- 8 Documentation
- 9 Stainless Steel 310 Wire Mesh
Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Wire Mesh, which contain 16 percent to 26 percent chromium and up to 35 percent nickel, which, like manganese, is a strong austenite. SS 310 Hexagonal Wire Mesh has characteristics from an invisible, self – healing chromium oxide film that forms when chromium is added at concentrations greater than 10.5 percent. The best corrosion resistance is obtained in this austenitic Stainless Steel 310S Welding Wire Mesh, where their microstructures consist of very clean crystals in which all alloying elements are held in solid solution.
Stainless Steel 310 Wire Mesh Manufacturer In India | Stainless Steel 310 Wire Mesh Manufacturer In Mumbai | Stainless Steel 310 Wire Mesh Exporter In India | Stainless Steel 310 Wire Mesh Exporter In Mumbai | Stainless Steel 310 Wire Mesh Supplier In India | Stainless Steel 310 Wire Mesh Supplier In Mumbai | Stainless Steel 310 Wire Mesh Stockist In India | Stainless Steel 310 Wire Mesh Stockist In Mumbai
Stainless Steel 310 Wire Mesh
Austenitic SS 310 Netting Wire Mesh cannot be hardened by heat treatment; they are also nonmagnetic. The ferritic and martensitic Stainless Steel 310S Woven Wire Mesh both have an excellent microstructure, where the latter has a higher carbon level and can be hardened and is used for knives and tools.
Stainless Steel 310 Spring Steel Wire Mesh contain only up to 0.12 percent carbon, which also have chromium as their main alloy addition and practically no nickel. Corrosion resistance of this Stainless Steel 310S Fencing Wire Mesh is modest, and they are ferromagnetic. SS 310 Wire Mesh is employed at high temperatures — e.g., 800 Degree C (1,450 Degree F). Solution hardening of this Stainless Steel 310S Wire Mesh is used in this group to keep the steels strong at such heat.
SS 310/310S Wiremesh Specifications |
||
| Specifications | : | ASTM A 164 ASME SA 164 |
| Standard | : | ASTM, ASME International Standards |
| Length | : | 30m to 100″ |
| Width | : | 1m to 48″ |
| Type | : | Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc. |
310/310S Stainless Steel Wire Mesh Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
Stainless Steel 310S Wiremesh Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310S Stainless Steel Wiremesh
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310/310S Wire Mesh Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
310/310S Steel Wiremesh Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 310 Wire Mesh
Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Wire Mesh, which contain 16 percent to 26 percent chromium and up to 35 percent nickel, which, like manganese, is a strong austenite. SS 310 Hexagonal Wire Mesh has characteristics from an invisible, self – healing chromium oxide film that forms when chromium is added at concentrations greater than 10.5 percent. The best corrosion resistance is obtained in this austenitic Stainless Steel 310S Welding Wire Mesh, where their microstructures consist of very clean crystals in which all alloying elements are held in solid solution.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
0 Comments