Contents
- 1 Hastelloy X Hydraulic Fittings Specifications
- 2 Hastelloy X Hydraulic Fittings Chemical Composition
- 3 Hastelloy Alloy X Hydraulic Fittings Mechanical Properties
- 4 Equivalent Grades for Alloy X Hydraulic Tube Fittings
- 5 Hastelloy Alloy X Hydraulic Fittings Application Industries
- 6 Hastelloy X Hydraulic Tube Fittings Test Certificates
- 7 Material Testing
- 8 Documentation
- 9 Hastelloy X Hydraulic Fittings
Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Hydraulic Fittings, which is being heat – treated at 2050 Degree F, and then rapid quenched condition. Our Hastelloy X Hydraulic Type Fittings can easily be cold – worked because of its ductility and cold – forming is the preferred method of forming. These Hastelloy X Forged Hydraulic Fittings is truly an all-purpose metal, which is best known for its wear and galling resistance. Our austenitic Hastelloy X Hydraulic Forged Fittings was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800 Degree F.
Hastelloy X Hydraulic Fittings Manufacturer In India | Hastelloy X Hydraulic Fittings Manufacturer In Mumbai | Hastelloy X Hydraulic Fittings Exporter In India | Hastelloy X Hydraulic Fittings Exporter In Mumbai | Hastelloy X Hydraulic Fittings Supplier In India | Hastelloy X Hydraulic Fittings Supplier In Mumbai | Hastelloy X Hydraulic Fittings Stockist In India | Hastelloy X Hydraulic Fittings Stockist In Mumbai
Hastelloy X Hydraulic Fittings
The oxidation resistance of these Alloy X Hydraulic Type Fittings is similar to SS 309, and also far superior to SS 304S. The additions of Silicon and Manganese have given our Alloy X Forged Hydraulic Fittings a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths in these Alloy X Hydraulic Forged Fittings are attainable through cold working the material and are still fully austenitic after severe cold – working.
This working does not enhance the anti – galling properties of our Hastelloy UNS N06002 Hydraulic Fittings as are normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into these Alloy N06002 Hydraulic Type Fittings is added strength and hardness, and the wear resistance does not decrease noticeably.
Hastelloy X Hydraulic Fittings Specifications |
||
| Specifications | : | ASTM B366 / ASME SB366 |
| Size | : | 1/16” to 2″ inch |
| Thread | : | NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc. |
| Pressure Rating |
: | 3000 – 6000 PSI |
| PTFE Standards | : | ASTM 3294, ASTM D1710 |
| Applicable temperature | : | 150-400°C |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Hastelloy X Hydraulic Fittings Chemical Composition
| Grade | Ni | Mo | Cr | Fe | Mn | C | Co | Si | P | S |
| Hastelloy X | Balance | 8.00 – 10.00 | 20.50 – 23.00 | 17.00 – 20.00 | 1.00 max | 0.05 – 0.15 | 0.50 – 2.50 | 1.00 max | 0.04 max | 0.03 max |
Hastelloy Alloy X Hydraulic Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.22 g/cm³ | 1355°C | 655 MPa | 240 MPa | 35% |
Equivalent Grades for Alloy X Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS |
| Hastelloy X | 2.4665 | N06002 |
Hastelloy Alloy X Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Hastelloy X Hydraulic Tube Fittings Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Hastelloy X Hydraulic Fittings
Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Hydraulic Fittings, which is being heat – treated at 2050 Degree F, and then rapid quenched condition. Our Hastelloy X Hydraulic Type Fittings can easily be cold – worked because of its ductility and cold – forming is the preferred method of forming. These Hastelloy X Forged Hydraulic Fittings is truly an all-purpose metal, which is best known for its wear and galling resistance. Our austenitic Hastelloy X Hydraulic Forged Fittings was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800 Degree F.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments