Contents
- 1 Stainless Steel 310/310S Hydraulic Fittings Specifications
- 2 SS 310/310S Hydraulic Fittings Chemical Composition
- 3 Stainless Steel 310/310S Hydraulic Fittings Mechanical Properties
- 4 Equivalent Grades for 310/310S Stainless Steel Hydraulic Tube Fittings
- 5 SS 310/310S Hydraulic Fittings Application Industries
- 6 Stainless Steel 310/310S Hydraulic Tube Fittings Test Certificates
- 7 Material Testing
- 8 Documentation
- 9 Stainless Steel 310 Hydraulic Fittings
Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Hydraulic Fittings, which is solidified in continuous casting processes. The most widely used of which feeds Stainless Steel 310 Hydraulic Fittings continuously into short, water – cooled vertical copper mould and, at the same time, continuously withdraws the frozen shell, including the liquid steel it contains. Even in a narrow range of concentrations of mixtures of carbon and iron that make Stainless Steel 310S Hydraulic Fittings, a number of different metallurgical structures, with very different properties can form. Understanding such properties is essential to making quality steel, which permits the furnaces to run with a cheaper acid lining.
Stainless Steel 310 Hydraulic Fittings Manufacturer In India | Stainless Steel 310 Hydraulic Fittings Manufacturer In Mumbai | Stainless Steel 310 Hydraulic Fittings Exporter In India | Stainless Steel 310 Hydraulic Fittings Exporter In Mumbai | Stainless Steel 310 Hydraulic Fittings Supplier In India | Stainless Steel 310 Hydraulic Fittings Supplier In Mumbai | Stainless Steel 310 Hydraulic Fittings Stockist In India | Stainless Steel 310 Hydraulic Fittings Stockist In Mumbai
Stainless Steel 310 Hydraulic Fittings
If quenching is done improperly, the internal stresses in Stainless Steel 310 Forged Hydraulic Fittings can cause a part to shatter as it cools. At the very least, Stainless Steel 310S Forged Hydraulic Fittings cause internal work hardening and other microscopic imperfections. Stainless Steel 310 Hydraulic Type Fittings is common for quench cracks to form when steel is water quenched, although they may not always be visible.
Foundries that cast Stainless Steel 310S Hydraulic Type Fittings into commercial products mainly employ coreless induction furnaces or electric – arc furnaces for melting scrap. SS 310 Hydraulic Fittings quality is normally high because a large portion of return scrap is used in the form of gates and risers left over from previous casting operations.
Stainless Steel 310/310S Hydraulic Fittings Specifications |
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 310/310S Hydraulic Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
Stainless Steel 310/310S Hydraulic Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 310/310S Stainless Steel Hydraulic Tube Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
SS 310/310S Hydraulic Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 310/310S Hydraulic Tube Fittings Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 310 Hydraulic Fittings
Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Hydraulic Fittings, which is solidified in continuous casting processes. The most widely used of which feeds Stainless Steel 310 Hydraulic Fittings continuously into short, water – cooled vertical copper mould and, at the same time, continuously withdraws the frozen shell, including the liquid steel it contains. Even in a narrow range of concentrations of mixtures of carbon and iron that make Stainless Steel 310S Hydraulic Fittings, a number of different metallurgical structures, with very different properties can form. Understanding such properties is essential to making quality steel, which permits the furnaces to run with a cheaper acid lining.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments