Ninthore Overseas is one of the Leading Manufacturer And Exporter of High Quality Brass Sheets, Plates Coils, which are all prone to sigma phase formation if exposed for long periods to a temperature of about 590 Degree C to 870 Degree C. The problem of grain boundary carbide precipitation in Brass Plates was discussed under inter – granular corrosion. This same phenomenon occurs when Brass Coils are exposed in service to temperatures of 425 Degree C to 815 Degree C, resulting in a reduction of corrosion resistance which may be significant. If this problem is to be avoided the use of stabilized grades such as Brass Slating Coils should be considered.
A further problem that Brass Perforated Coils have in high temperature applications is the formation of sigma phase. The formation of sigma phase in Brass Plates is dependent on both time and temperature and is different for each type of steel. In general, Brass Coils is practically immune to sigma phase formation, but not so those grades with higher chromium contents with molybdenum or with higher silicon contents.
Brass Sheets Manufacturer In India | Brass Sheets Manufacturer In Mumbai | Brass Sheets Exporter In India | Brass Sheets Exporter In Mumbai | Brass Sheets Supplier In India | Brass Sheets Supplier In Mumbai | Brass Sheets Stockist
Sigma phase embrittlement refers to the formation of a precipitate in the microstructure of Brass Slating Coils over a long period of time within this particular temperature range. Generally, beta – phase Brass Perforated Coils is the more ductile phase and alpha – phase is stronger yet less ductile, due to the larger number of slip planes in the bcc structure of the beta – phase in comparison to the hcp alpha – phase.
Brass Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM / ASME SB 62 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 100 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, No.3, No.4, HL, BA, 8K |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Brass Sheet, Plate & Coil Chemical Composition
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
Brass Sheet, Plate & Coil Physical Properties
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modules of Elasticity in Tension | 14000 ksi |
Brass Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Brass Sheets, Plate & Coils Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Brass Sheets
Ninthore Overseas is one of the Leading Manufacturer And Exporter of High Quality Brass Sheets, Plates Coils, which are all prone to sigma phase formation if exposed for long periods to a temperature of about 590 Degree C to 870 Degree C.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments