Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Tube to Male Fittings, where a mixture of nitric acid and hydrofluoric acid is used in pickling. As a distinctive feature of high Nickel, machinability is difficult in comparison with the austenitic Stainless Steel 347H Tube Fittings, but is easier than with Ni – based alloys. Stainless Steel 347H Compression Fittings is used as a super – hard tool whenever possible, together with a slow feed speed and large cut depth, is advised. Possible welding methods include shielded metal arc welding, TIG welding, and plasma welding, in the same manner as with standard austenitic Stainless Steel 347H Male Connector Fittings.

Stainless Steel 347H Tube to Male Fittings Manufacturer In India | Stainless Steel 347H Tube to Male Fittings Manufacturer In Mumbai | Stainless Steel 347H Tube to Male Fittings Exporter In India | Stainless Steel 347H Tube to Male Fittings Exporter In Mumbai | Stainless Steel 347H Tube to Male Fittings Supplier In India | Stainless Steel 347H Tube to Male Fittings Supplier In Mumbai | Stainless Steel 347H Tube to Male Fittings Stockist In India | Stainless Steel 347H Tube to Male Fittings Stockist In Mumbai
Stainless Steel 347H Tube to Male Fittings

Stainless Steel 347H Tube to Male Fittings

As welding consumables, Stainless Steel 347H Ferrule Tube Fittings should be used, where pre – heating and post – welding heat treatment are not necessary. By adding optimal quantities of chromium, molybdenum, nickel and other alloying metals, we improve Stainless Steel 347H Double Ferrule Tube Fittings to provide overall corrosion protection as well as improve resistance against grain boundary corrosion, pitting and crevice corrosion, and stress corrosion cracking.

Solution annealing of Stainless Steel 347H Compression Tube Fittings should be performed at 1105 Degree C, and higher followed by being quenched in water or rapidly cooled by other means. However, due to the high corrosion resistance of 347H Stainless Steel Male Connector Fittings, scale is somewhat difficult to remove in comparison with Type 347.

Stainless Steel 347H Tube to Male Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 347H Tube To Male Fittings Chemical Composition
Grade C Mn Si P S Cr Cb Ni Fe
SS 347H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 20.00 8xC – 1.10 9.00 – 13.00 63.72 min
Stainless Steel 347H Tube To Male Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Grades for 347H Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347H 1.4961 S34709 SUS 347H X6CrNiNb18-12
SS 347H Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 347H Tube To Male Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 347H Tube to Male Fitting

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 347H Tube to Male Fittings, where a mixture of nitric acid and hydrofluoric acid is used in pickling. As a distinctive feature of high Nickel, machinability is difficult in comparison with the austenitic Stainless Steel 347H Tube Fittings, but is easier than with Ni – based alloys

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5