Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Angle And Other Products, where brazing requires appropriate silver – base brazing alloys. A great care must be taken to ensure that there are no stresses in this Nickel 200 Angle being silver brazed, since any stress can cause inter – granular penetration of the brazing material, and severe stress cracking. Applications for our Nickel 200 Chain have withstood the test of time, as they are still widely used and range from seawater system piping, condensers and heat exchangers in naval vessels, commercial shipping, multiple-stage flash desalination and power stations.

Nickel Alloy 200 Angle Manufacturer In India | Nickel Alloy 200 Angle Manufacturer In Mumbai | Nickel Alloy 200 Angle Exporter In India | Nickel Alloy 200 Angle Exporter In Mumbai | Nickel Alloy 200 Angle Supplier In India | Nickel Alloy 200 Angle Supplier In Mumbai | Nickel Alloy 200 Angle Stockist In India | Nickel Alloy 200 Angle Stockist In Mumbai
Nickel Alloy 200 Angle

Nickel Alloy 200 Angle

This Nickel 200 I-Beam have also been used as splash zone cladding on offshore structures and protective cladding on boat hulls, as well as for solid hulls themselves. Due to its ductility, our Nickel 200 T-Beam can be readily fabricated in a wide variety of product forms and fittings. This Nickel 200 H-Beam can be readily expanded into tube sheets for the manufacturing of shell and tube heat exchangers.

Details of fabrication procedures for our Alloy 200 Angle includes general handling, cutting and machining, forming, heat treatment, preparing for welding, weld preparations. Thermocouples and resistors of this Alloy 200 Chain whose resistance is stable across changes in temperature contain alloy constantan, which consists of 45 % nickel. Our Alloy 200 I-Beam tends to be used as seamless tubing and expanded rather than welded into the tube plate.

Nickel 200 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B160 / ASME B160
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Nickel 200 Angle
: 5mm to 9mm
Nickel 200 Channel
: 40mm*20mm~300mm*300mm
Nickel 200 Beam : 3″ thru 12.31″
Nickel 200 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
200 Nickel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Cu Fe Ni S
Nickel 200 0.15 max 0.35  max 0.35 max 0.25 max 0.40 max 99.00 min 0.01 max
Nickel Alloy 200 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 g/cm3 1466 °C (2635 °F) Psi – 67,000 , MPa – 432 Psi – 21,500 , MPa – 148 45%
Equivalent Grades for 200 Nickel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS JIS GOST BS AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 НП-2 NA 11 N-100M Ni 99.2
Nickel 200 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing 
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
200 Nickel Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Angle

Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Angle And Other Products, where brazing requires appropriate silver – base brazing alloys. A great care must be taken to ensure that there are no stresses in this Nickel 200 Angle being silver brazed, since any stress can cause inter – granular penetration of the brazing material, and severe stress cracking. Applications for our Nickel 200 Chain have withstood the test of time, as they are still widely used and range from seawater system piping, condensers and heat exchangers in naval vessels, commercial shipping, multiple-stage flash desalination and power stations.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5