Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Aluminium Beam And Other Aluminium Products, which is being offered in different shapes and sizes as per clients’ requirements. We supply Aluminium 6061 Angle for a variety of applications and will help in determining the precise amount for your current project. Although Aluminium 6082 C-Channel was designed for use in sulphuric acid-related industries; it finds wide usage throughout the chemical processing industry. Common elements that are added to make Aluminium 5083 Chain are molybdenum, manganese, nickel, silicon, boron, chromium, and vanadium. With enough of these elements, the austenitic structure of Aluminium 5086 I-Beam may be obtained at room temperature.

Aluminium Beam Manufacturer In India | Aluminium Beam Manufacturer In Mumbai | Aluminium Beam Exporter In India | Aluminium Beam Exporter In Mumbai | Aluminium Beam Supplier In India | Aluminium Beam Supplier In Mumbai | Aluminium Beam Stockist In India | Aluminium Beam Stockist In Mumbai 
Aluminium Beam

Aluminium Beam

Carbide-forming elements in Aluminium 5052 T-Beam raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements. For applications requiring maximum ductility, Aluminium 6063 H-Beam with low Sulphur levels can be supplied by producers using ladle-refining techniques. Ninthore Overseas is one of the pioneer exporters and traders of Aluminium Steel 7075 Angle, which is also being offered to our clients in personalized sizes and shapes as per requirements. As corrosion is an important issue in off-shore applications for Aluminium Steel 1100 C-Channel, the expansion joints are painted with a three-layered and two-component Epoxy paint. In Aluminium Steel 6061 Chain, a two-component polyurethane high glossy coat was added, which provides a robust protective coating in the severely corrosive atmospheric environment.

Aluminium channels are used for a variety of purposes. Depending on what you want to use the channels for will determine which type of channel is best for the job. The two main types of Aluminium channels are extruded and formed. The extruded channels are made by placing the Aluminium plate in a die and pushing it through to form the shape that you need. Formed Aluminium channels are cut into their desired shape with a circular saw or other like device, then bent into the correct position using dies, dies presses, jigs or other tools.

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B308 / ASME B308
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Aluminium 6061 Angle
: 5mm to 9mm
Aluminium 6061 Channel
: 40mm*20mm~300mm*300mm
Aluminium 6061 Beam : 3″ thru 12.31″
Aluminium 6061 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
Aluminium Angle, Channel, Beam, Chain Chemical Composition
Grade Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
Aluminium 0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance 0.15 max
Mechanical Properties for Aluminium Angle, Channel, Beam, Chain
Temper Tensile Hardness
Ultimate Yield Elongation Brinell
KSI MPA KSI MPA %
T6, T651 45 310 21 145 25 65
Physical Property for Aluminium Angle, Channel, Beam, Chain
Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS
Aluminium Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Aluminium Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)