Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 625 Beam And Other Inconel Products, which is non – magnetic and spark resistant. Strength of Inconel 625 Angle is derived from the solid solution strengthening effect of molybdenum and niobium on its nickel – chromium matrix. Our Inconel 625 C-Channel is often used in oil well, natural gas and petroleum industry. Inconel 625 H-Beam in the solution annealed condition is characterized by excellent creep strength above about 600 Degree C (1112 Degree F).

Inconel 625 Beam Manufacturer In India | Inconel 625 Beam Manufacturer In Mumbai | Inconel 625 Beam Exporter In India | Inconel 625 Beam Exporter In Mumbai | Inconel 625 Beam Supplier In India | Inconel 625 Beam Supplier In Mumbai | Inconel 625 Beam Stockist In India | Inconel 625 Beam Stockist In Mumbai 
Inconel 625 Beam

Inconel 625 Beam

Our Inconel 625 I-Beam has three heat treatments: solutions annealing at 2000 Degree F / 2200 Degree F and air quench or quicker; annealing 1600 Degree F / 1900 Degree F and air quenching or quicker; and lastly stress relieving 1100 Degree F / 1500 Degree F and air quenching. Inconel 625 T-Beam can be selected because of its high strength, excellent uniform corrosion resistance, resistance to stress cracking and excellent pitting resistance in 500 Degree F – 600 Degree F (260 Degree C – 316 Degree C) water.

Ideally, to control grain size of our Inconel 625 Chain, finish hot working operations should be performed at the lower end of the temperature range. Alloy 625 Angle resists scaling and oxidation at high temperatures, and so is generally used in flare stacks on offshore oil platforms. Our Alloy 625 C-Channel is often used in chemical processing equipment handling mixed acids both oxidizing and reducing, Aircraft ducting systems, Jet engine exhaust systems and Seawater applications.

Inconel 625 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B446 / ASME B446
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Inconel 625 Angle
: 5mm to 9mm
Inconel 625 Channel
: 40mm*20mm~300mm*300mm
Inconel 625 Beam : 3″ thru 12.31″
Inconel 625 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
625 Inconel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Cr S Fe Mo Ni Cu
Inconel 625 0.10 max 0.50 max 0.50 max 20.0-23.0 0.15 max 5.0 max 58 min
Inconel 625 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5%
Equivalent Grades for 625 Inconel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625 2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22Mo9Nb
Inconel 625 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
625 Steel Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 625 Beam

Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Inconel 625 Beam And Other Inconel Products, which is non – magnetic and spark resistant. Strength of Inconel 625 Angle is derived from the solid solution strengthening effect of molybdenum and niobium on its nickel – chromium matrix. Our Inconel 625 C-Channel is often used in oil well, natural gas and petroleum industry. Inconel 625 H-Beam in the solution annealed condition is characterized by excellent creep strength above about 600 Degree C (1112 Degree F).