Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304L Beam, which is an array of stainless steel structures manufactured by us. Stainless Steel 304L Angle are manufactured by using state of art welding equipment and also machined to required parameters under strict observations and supervision of technically strong supervisors. The welding of Stainless Steel 304L C-Channel is calculated and supports are provided at proper positions to minimize the distortions while fabricating these components. Our Stainless Steel 304L H-Beam is then stress relieved to remove all the residual stresses induced during the welding process.

Stainless Steel 304L Beam Manufacturer In India | Stainless Steel 304L Beam Manufacturer In Mumbai | Stainless Steel 304L Beam Exporter In India | Stainless Steel 304L Beam Exporter In Mumbai | Stainless Steel 304L Beam Supplier In India | Stainless Steel 304L Beam Supplier In Mumbai | Stainless Steel 304L Beam Stockist In India | Stainless Steel 304L Beam Stockist In Mumbai 
Stainless Steel 304L Beam

Stainless Steel 304L Beam

These industrial components of Stainless Steel 304L I-Beam call for very deep and thorough knowledge on all the fronts of the products such as: planning, execution, procurement, fabrication, machining, handling, Inspection and delivery. All developments and process layouts of our Stainless Steel 304L T-Beam are formulated keeping in mind various parameters and requirements of the components. Few of the industries served Stainless Steel 304L Chain are Energy, Machine Building, Power, Glass, traction Motors for Railways, etc.

We present you a vast array of locomotive parts made by these SS 304L Angle that are widely demanded and appreciated in the locomotive industry for their reliable and efficient operations. Our range of SS 304L C-Channel is designed and developed in conformation with set industrial standards and meet international quality norms. These SS 304L H-Beam made by us are in compliance with relevant quality standards.

SS 304L Angle, Channel, Beam, Chain Specifications
Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 304L Angle
: 5mm to 9mm
SS 304L Channel
: 40mm*20mm~300mm*300mm
SS 304L Beam : 3″ thru 12.31″
SS 304L Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
304L Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.035 max 2 max 1.0 max 0.045 max 0.030 max 18 – 20 8 – 13
Stainless Steel 304L Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Grades for 304L Stainless Steel Angle, Channel, Beam, Chain
SS 304L 1.4306/1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11
SS 304L Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
304L Steel Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test



• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)