Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Titanium Grade 2 Beam And Other Titanium Products, which is stronger than Grade 1 and equally corrosion – resistant against most applications. Titanium Grade 2 Angle is least used of the commercially pure titanium grades, but that does not make it any less valuable. Titanium Grade 2 C-Channel can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F. Titanium Grade 2 Chain is not heat treatable, and is used for condensers & heat exchangers.

Titanium Grade 2 Beam Manufacturer In India | Titanium Grade 2 Beam Manufacturer In Mumbai | Titanium Grade 2 Beam Exporter In India | Titanium Grade 2 Beam Exporter In Mumbai | Titanium Grade 2 Beam Supplier In India | Titanium Grade 2 Beam Supplier In Mumbai | Titanium Grade 2 Beam Stockist In India | Titanium Grade 2 Beam Stockist In Mumbai
Titanium Grade 2 Beam

Titanium Grade 2 Beam

Titanium Grade 2 I-Beam is an alpha – beta alloy, which has better response than Ti Grade 5 when heat treating to high strength levels. The oxide scale of Titanium Grade 2 H-Beam, in turn, presents a very good protective layer, preventing bulk from oxidation. The oxidized layer of Titanium Grade 2 T-Beam provides a better protection than the use of argon or high vacuum. Grade 2 Titanium Angle has physical and mechanical properties equivalent to CP3 titanium.

The corrosion resistance of Grade 2 Titanium Chain is based on the presence of a stable, continuous, tightly adherent oxide layer. Grade 2 Titanium C-Channel also offers a higher strength – to – weight ratio and increased corrosion resistance compared to the stainless steel alloys, thus making it an attractive choice for medical applications. Grade 2 Titanium I-Beam possesses good weldability, strength, ductility and formability.

Titanium Grade 2 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B348 / ASME B348
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Titanium Gr 2 Angle
: 5mm to 9mm
Titanium Gr 2 Channel
: 40mm*20mm~300mm*300mm
Titanium Gr 2 Beam : 3″ thru 12.31″
Titanium Gr 2 Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
Grade 2 Titanium Angle, Channel, Beam, Chain Chemical Composition
Grade C H N O Ti Fe
Titanium Grade 2 0.1 max 0.015 max 0.3 max 0.025 max 99.2 min 0.3 max
Titanium Gr 2 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
 4.5 g/cm3  1665 °C (3030 °F)  Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275  20 %
Equivalent Grades for Grade 2 Titanium Angle, Channel, Beam, Chain
Titanium Grade 2 3.7035 R50400
Titanium Grade 2 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Grade 2 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *