Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Buttweld Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain. In fact, Monel 400 Tee Pipe Fittings is a nickel – copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 Pipe Elbow works in a wide range of temperatures, and is available in multiple forms for a variety of products. Meanwhile, these Monel 400 Reducer are also being offered in different sizes and shapes to our customers.

Monel Alloy 400 Buttweld Fittings Manufacturer In India | Monel Alloy 400 Buttweld Fittings Manufacturer In Mumbai | Monel Alloy 400 Buttweld Fittings Exporter In India | Monel Alloy 400 Buttweld Fittings Exporter In Mumbai | Monel Alloy 400 Buttweld Fittings Supplier In India | Monel Alloy 400 Buttweld Fittings Supplier In Mumbai | Monel Alloy 400 Buttweld Fittings Stockist In India | Monel Alloy 400 Buttweld Fittings Stockist In Mumbai 
Monel Alloy 400 Buttweld Fittings

Monel Alloy 400 Buttweld Fittings

Our Monel 400 Cross Pipe Fittings (UNS N04400) is a nickel – copper alloy with good strength and excellent corrosion resistance in a range of media especially sea water, hydrofluoric acid, sulfuric acid, and alkalis. Monel 400 Bend Pipe Fittings is a solid – solution alloy that can be hardened only by cold working, where nickel and copper form a solid solution in all compositions.

These Monel 400 Stub End can be fabricated readily by hot – and cold – working, machining, and welding. Thus, Monel 400 End Cap Pipe Fittings can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.

Monel 400 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
Monel 400 Pipe Fittings Chemical Composition
Monel 400 Ni C Al Mn Si Fe Cu S Co Cr
63.0 min 0.3 max 0.50 max 2.0 max 0.5 max 1.0 – 2.5 28.0 – 34.0 0.02 max
Monel 400 Buttweld Fittings Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 35,000 , MPa – 240 Psi – 80,000 , MPa – 550 40 %
Equivalent Grades for 400 Monel Pipe Fitting
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel 400 N04400 2.4360 NU-30M NiCu30Fe NW 4400 NA 13 МНЖМц 28-2,5-1,5
Monel Alloy 400 Buttweld Pipe Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Monel 400 Buttweld Fitting Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Monel Alloy 400 Buttweld Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Buttweld Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain. In fact, Monel 400 Tee Pipe Fittings is a nickel – copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US