Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Buttweld Fittings to the valued customers, which has some excellent features to offer such as lightweight, durable, dimensionally stable, and more. Our Nickel 200 Elbow Butt Weld Pipe Fittings (UNS N02200) are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. These Nickel 200 Tee Butt Weld Pipe Fittings are commercially pure wrought nickel, and has good mechanical properties and excellent resistance to many corrosive environments.

Nickel Alloy 200 Buttweld Fittings Manufacturer In India | Nickel Alloy 200 Buttweld Fittings Manufacturer In Mumbai | Nickel Alloy 200 Buttweld Fittings Exporter In India | Nickel Alloy 200 Buttweld Fittings Exporter In Mumbai | Nickel Alloy 200 Buttweld Fittings Supplier In India | Nickel Alloy 200 Buttweld Fittings Supplier In Mumbai | Nickel Alloy 200 Buttweld Fittings Stockist In India |Nickel Alloy 200 Buttweld Fittings Stockist In Mumbai
Nickel Alloy 200 Buttweld Fittings

Nickel Alloy 200 Buttweld Fittings

Our Nickel 200 Reducer are often used in Chemical Processing and Storage. Meanwhile, these Nickel 200 Cross Butt Weld Pipe Fittings are also being offered in different sizes and shapes to our customers. Our annealed Nickel 200 Pipe Bend has a low hardness and good ductility and malleability. These attributes, combined with good weldability, make these Nickel 200 Stub End Butt Weld Pipe Fittings highly fabricable.

Our Nickel 200 Pipe End Cap has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility. Typically, the elemental restrictions of these Nickel 200 Dish Cap Butt Weld Pipe Fittings and nickel 201 pipe fittings are combined into one dual- certified chemistry resulting in a single alloy with the desired characteristics of both alloys.

Nickel 200 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
Nickel 200 Pipe Fittings Chemical Composition
Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max 0.35 max 0.1 max 0.4 max 0.01 max 0.25 max
Nickel 200 Buttweld Fittings Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %
Equivalent Grades for 200 Nickel Alloy Pipe Fitting
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2
Nickel Alloy 200 Buttweld Pipe Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel 200 Buttweld Fitting Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)