Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316TI Buttweld Fittings, which retains physical and mechanical properties similar to standard grades of 316. The main advantage of Stainless Steel 316Ti Elbow Butt Weld Pipe Fittings is that it can be held at higher temperatures for a longer period without sensitization (precipitation) occurring. Stainless Steel 316Ti Reducer has good resistance to oxidation in intermittent service to 870 Degree C and in continuous service to 925 Degree C. However, continuous use at 425 Degree C – 860 Degree C is not recommended in Stainless Steel 316Ti Tee Butt Weld Pipe Fittings if corrosion resistance in water is required.

Stainless Steel 316TI Buttweld Fittings Manufacturer In India | Stainless Steel 316TI Buttweld Fittings Manufacturer In Mumbai | Stainless Steel 316TI Buttweld Fittings Exporter In India | Stainless Steel 316TI Buttweld Fittings Exporter In Mumbai| Stainless Steel 316TI Buttweld Fittings Supplier In India | Stainless Steel 316TI Buttweld Fittings Supplier In Mumbai | Stainless Steel 316TI Buttweld Fittings Stockist In India | Stainless Steel 316TI Buttweld Fittings Stockist In Mumbai
Stainless Steel 316TI Buttweld Fittings

Stainless Steel 316TI Buttweld Fittings

Stainless Steel 316Ti Cross Butt Weld Pipe Fittings cannot be hardened by heat treatment. Solution treatment or annealing in Stainless Steel 316Ti Bends Butt Weld Pipe Fittings can be done by rapid cooling after heating to 1010 Degree C – 1120 Degree C. In this instance, Stainless Steel 316Ti Stub End is recommended due to its resistance to carbide precipitation.

Where high strength is required at temperatures above 500 Degree C, Stainless Steel 316Ti End Cap is recommended. Stainless Steel 316Ti Dish Cap Butt Weld Pipe Fittings is readily brake or roll formed into a variety of parts. Stainless Steel 316Ti Lateral Tee Butt Weld Pipe Fittings is also suited to stamping, heading and drawing but post work annealing is recommended to relieve internal stresses.

Stainless Steel 316TI Pipe Fittings Specifications
Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
SS 316TI Pipe Fittings Chemical Composition
Grade C Ni Mn P S Cr Si Mo N
316TI 0.08 max 10.00 – 14.00 2.0 max 0.045 max 0.030 max 16.00 – 18.00 0.75 max 2.00 – 3.00
Stainless Steel 316TI Butt weld Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399°C (2550°F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Grades for 316TI Stainless Steel Pipe Fitting
316TI 1.4571 s31703 SUS 316Ti      320S31    08Ch17N13M2T   Z6CNDT17‐123 X6CrNiMoTi17-12-2
SS WERKSTOFF NR.1.4571 Buttweld Pipe Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 316TI Buttweld Fitting Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *