Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Titanium Gr 5 Buttweld Fittings, where they are in tandem with international quality standards and are manufactured using high quality material. These Titanium Grade 5 Elbow Butt Weld Pipe Fittings is a fantastic material, which is difficult to work with, but so rewarding when it can be pulled off. Our Titanium Grade 5 Tee Butt Weld Pipe Fittings is high – strength alloy which can be used at cryogenic temperatures up to about 800 Degree F (427 Degree C). Often referred to as the “work horse” grade, these Titanium Grade 5 Cross Butt Weld Pipe Fittings is most commonly found in the annealed condition.

Titanium Gr 5 Buttweld Fittings Manufacturer In India | Titanium Gr 5 Buttweld Fittings Manufacturer In Mumbai | Titanium Gr 5 Buttweld Fittings Exporter In India | Titanium Gr 5 Buttweld Fittings Exporter In Mumbai | Titanium Gr 5 Buttweld Fittings Supplier In India | Titanium Gr 5 Buttweld Fittings Supplier In Mumbai | Titanium Gr 5 Buttweld Fittings Stockist In India | Titanium Gr 5 Buttweld Fittings Stockist In Mumbai
Titanium Gr 5 Buttweld Fittings

Titanium Gr 5 Buttweld Fittings

Meanwhile, Titanium Grade 5 Reducer are also being offered in different sizes and shapes to our customers. We offer processing services and a fully automated magazine feed rod blanking line for these Titanium Grade 5 Bend Pipe Fittings, where we can process your material to your exact requirements.

Titanium Grade 5 Stub End Butt Weld Pipe Fittings has excellent corrosion resistance in oxidizing conditions, and is effectively immune from stress corrosion cracking, pitting corrosion and crevice corrosion in chloride solutions below 70 Degree C. These Titanium Grade 5 End Cap is the most formable and corrosion resistant amongst the pure grades of Titanium is biocompatible and also has excellent tri-biological properties.

Titanium Gr 5 Pipe Fittings Specifications
Specifications : ASTM B363 / ASME SB363
Size : 1/2″ to 24″ NB to 24″NB in
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
Titanium Gr 5 Pipe Fittings Chemical Composition
Titanium Gr 5 C Ti N Fe H O V Al
0.10 max 90 min 0.05 max 0.40 max 0.015 max 0.20 max 3.5-4.5 5.5-6.75 max
Titanium Gr 5 Buttweld Fittings Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 128000 , MPa – 880 Psi – 138000 , MPa – 950 14 %
Equivalent Grades for Gr 5 Titanium Pipe Fitting
Titanium Gr 5 R56400 3.7165
Titanium Alloy Gr 5 Buttweld Pipe Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Titanium Gr 5 Buttweld Fitting Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)