Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Aluminium Steel Chain And Other Aluminium Steel Products, which is being offered in different shapes and sizes as per clients’ requirements. We supply Aluminium 6061 Angle for a variety of applications and will help in determining the precise amount for your current project. Although Aluminium 6082 C-Channel was designed for use in sulphuric acid-related industries; it finds wide usage throughout the chemical processing industry. Common elements that are added to make Aluminium 5083 Chain are molybdenum, manganese, nickel, silicon, boron, chromium, and vanadium. With enough of these elements, the austenitic structure of Aluminium 5086 I-Beam may be obtained at room temperature.

Aluminium Steel Chain Manufacturer In India | Aluminium Steel Chain Manufacturer In Mumbai | Aluminium Steel Chain Exporter In India | Aluminium Steel Chain Exporter In Mumbai | Aluminium Steel Chain Supplier In India | Aluminium Steel Chain Supplier In Mumbai | Aluminium Steel Chain Stockist In India | Aluminium Steel Chain Stockist In Mumbai 
Aluminium Steel Chain

Aluminium Steel Chain

Carbide-forming elements in Aluminium 5052 T-Beam raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements. For applications requiring maximum ductility, Aluminium 6063 H-Beam with low Sulphur levels can be supplied by producers using ladle-refining techniques. Ninthore Overseas is one of the pioneer exporters and traders of Aluminium Steel 7075 Angle, which is also being offered to our clients in personalized sizes and shapes as per requirements.

As corrosion is an important issue in off-shore applications for Aluminium Steel 1100 C-Channel, the expansion joints are painted with a three-layered and two-component Epoxy paint. In Aluminium Steel 6061 Chain, a two-component polyurethane high glossy coat was added, which provides a robust protective coating in the severely corrosive atmospheric environment.

Aluminium 6061, 6082, 5083, 5086, 5052 ,6063, 7075, 1100 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B308 / ASME B308
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Aluminium 6061 Angle
: 5mm to 9mm
Aluminium 6061 Channel
: 40mm*20mm~300mm*300mm
Aluminium 6061 Beam : 3″ thru 12.31″
Aluminium 6061 Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
Aluminium Angle, Channel, Beam, Chain Chemical Composition
Grade Si Fe Cu Zn Mn Mg Ti Cr Al Others(Total)
Aluminium 0.40 – 0.80 0.70 max 0.15-0.40 0.25 max 0.15 0.8-1.2 0.15 max 0.04-0.35 Balance 0.15 max
Mechanical Properties for Aluminium Angle, Channel, Beam, Chain
Temper Tensile Hardness
Ultimate Yield Elongation Brinell
T6, T651 45 310 21 145 25 65
Physical Property for Aluminium Angle, Channel, Beam, Chain
Physical Property Value
Density 2,70 g/cm³
Melting Point 582 °C
Thermal Expansion 23.4 x 10^-6 /K
Modulus of Elasticity 69 GPa
Thermal Conductivity 170 W/m.K
Electrical Resistivity %43 IACS
Aluminium Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Aluminium Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)