Ninthore Overseas Is One Of The Leading Manufacture And Exporter Of High Quality Inconel 718 Chain, which has high strength qualities, worthy workability, and good weldability. The sole way to harden and strengthen Inconel 718 Angle is by cold work; age-hardening treatments are not necessary. Inconel 718 I-Beams should only be worked on at temperatures between 1900 and 2250 degrees Fahrenheit (1040 and 1230 degrees Celsius) for heavy hot work, and 1718 degrees Fahrenheit for mild work (870 Degree C). For gas turbine parts, such as those in jet engines, titanium dioxide factories, and equipment used in chlorination, Inconel 718 T-Beam is a superior option.

Inconel 718 Chain Manufacturer In India | Inconel 718 Chain Manufacturer In Mumbai | Inconel 718 Chain Exporter In India | Inconel 718 Chain Exporter In Mumbai | Inconel 718 Chain Supplier In India | Inconel 718 Chain Supplier In Mumbai | Inconel 718 Chain Stockist In India | Inconel 718 Chain Stockist In Mumbai
Inconel 718 Chain

Inconel 718 Chain

As it provides nickel content and resistance to chloride, ion stress, and corrosion cracking, Inconel 718 C-Channel should be forged in low sulfur plunging furnace settings. The corrosion resistance and high-temperature strength of Inconel 718 H-Beam have led to a wide variety of applications. It is resistant to a wide variety of corrosive conditions. Inconel 718 I-Beams should only be worked on at temperatures between 1900 and 2250 degrees Fahrenheit (1040 and 1230 degrees Celsius) for heavy hot work, and 1718 degrees Fahrenheit for mild work (870 Degree C). For gas turbine parts, such as those in jet engines, titanium dioxide factories, and equipment used in chlorination, Inconel 718 T-Beam is a superior option.

While Nickel 200 and Nickel 201 are less resistant to oxidizing circumstances than Inconel 718 Chain due to their higher chromium content, reducing conditions are also better resisted by Inconel 718 Chain due to its high nickel concentration. Additionally, to have greater fatigue, impact, and stronger tensile qualities, fine-grain Alloy 718 Angle generally offers improved corrosion resistance. Many applications in the heat-treating sector can benefit from the strength and oxidation resistance of these Alloy 718 C-Channel at high temperatures.

Inconel 718 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B166 / ASME B166
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Inconel 718 Angle
: 5mm to 9mm
Inconel 718 Channel
: 40mm*20mm~300mm*300mm
Inconel 718 Beam : 3″ thru 12.31″
Inconel 718 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
718 Inconel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Cr S Fe Mo Ni Cu
Inconel 718 0.08 max 0.35 max 0.35 max 17.0–21.0 0.15 max  – 50.0-55.0 min 0.30 max
Inconel 718 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.2 g/cm3 1.350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 482 45 %
Equivalent Grades for 718 Inconel Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 718 2.4668 N07718 NCF 718
Inconel 718 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
718 Steel Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 718 Chain

Ninthore Overseas Is One Of The Leading Manufacture And Exporter Of High Quality Inconel 718 Chain, which has high strength qualities, worthy workability, and good weldability. The sole way to harden and strengthen Inconel 718 Angle is by cold work; age-hardening treatments are not necessary. Inconel 718 I-Beams should only be worked on at temperatures between 1900 and 2250 degrees Fahrenheit (1040 and 1230 degrees Celsius) for heavy hot work, and 1718 degrees Fahrenheit for mild work (870 Degree C). For gas turbine parts, such as those in jet engines, titanium dioxide factories, and equipment used in chlorination, Inconel 718 T-Beam is a superior option.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5