Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Chain, which is also characterized by high ductility and impact strength. Stainless Steel 410 Angle is an austenitic stainless steel offering an excellent resistance to inter – granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 Degree to 1500 Degree F. Stainless Steel 410 C-Channel is well suited for applications related to chemical processing, heat exchangers, desalinization and more. With its high levels of chromium, molybdenum, and nitrogen, Stainless Steel 410 H-Beam has excellent resistance to a wide range of chemicals.

Stainless Steel 410 Chain Manufacturer In India | Stainless Steel 410 Chain Manufacturer In Mumbai | Stainless Steel 410 Chain Exporter In India | Stainless Steel 410 Chain Exporter In Mumbai | Stainless Steel 410 Chain Supplier In India | Stainless Steel 410 Chain Supplier In Mumbai | Stainless Steel 410 Chain Stockist In India | Stainless Steel 410 Chain Stockist In Mumbai 
Stainless Steel 410 Chain

Stainless Steel 410 Chain

Stainless Steel 410 I-Beam is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process streams. Stainless Steel 410 T-Beam provides a cost – efficient alternative to nickel – based alloys and titanium. Stainless Steel 410 Chain is alloyed with columbium – tantalum (referred to as niobium) and therefore allows good mechanical properties at high temperatures.

410 Stainless Steel Angle is known for their good thermal & electrical conductivities, high density, high melting point, and greater stiffness than steel. These characteristics make 410 Stainless Steel Chain the ideal alloy for use in high temperatures, above 1100 Degree C , which is higher than steels and nickel – based super alloys. 410 Stainless Steel H-Beam has a very low carbon content, which means there is very little risk of carbide precipitation during heating.

SS 410 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 410 Angle
: 5mm to 9mm
SS 410 Channel
: 40mm*20mm~300mm*300mm
SS 410 Beam : 3″ thru 12.31″
SS 410 Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
410 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si P S Cr Cb Ni Fe
SS 410 0.15 max 1 max 1 max 0.040 max 0.030 max 11.5-13.5 0.75
Stainless Steel 410 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
MPa – 480  MPa – 275
Equivalent Grades for 410 Stainless Steel Angle, Channel, Beam, Chain
SS 410 1.4006 S41000 SUS 410
SS 410 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
410 Steel Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test



• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)