Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy B3 Channel, Channel, Beam, and Chain. Hastelloy B3 T-Beam, which is appreciated in a variety of industries, including paper. Our highly skilled workers use cutting-edge equipment to supply the high-quality Alloy B3 Angle to clients all over the world. according to your design requirements, and the entire process is solely under the supervision of our independent quality systems.

Hastelloy B3 Channel Manufacturer In India | Hastelloy B3 Channel Manufacturer In Mumbai | Hastelloy B3 Channel Exporter In India | Hastelloy B3 Channel Exporter In Mumbai | Hastelloy B3 Channel Supplier In India | Hastelloy B3 Channel Supplier In Mumbai | Hastelloy B3 Channel Stockist In India | Hastelloy B3 Channel Stockist In Mumbai
Hastelloy B3 Channel

Hastelloy B3 Channel

Hastelloy B3 Beam is offered in a variety of specifications for usage in a variety of industries. Strong acidic and alkaline environments are well-resisted by Hastelloy B3 Angle, Channel, Beam, and Chain, which also give excellent resistance and inhibit pitting, crevice corrosion, and SCC. Additionally resistant to wet chloride gas, hypochlorite, and chlorine dioxide media are Hastelloy B3 Angle. In the presence of potent acids such sulfuric acid, phosphoric acid, hydrochloric acid, nitric acid, and organic acid, Hastelloy B3 C-Channel inhibits localized and inter-granular corrosion.

Up to 95 degrees Celsius (200 degrees Fahrenheit), Hastelloy B3 Chain offers exceptional corrosion resistance to the full range of sulfuric acid. Hastelloy B3 H-Beam is suitable for use in chloride concentrations of around or above 0.1 percent and at a pH of 2. The maximum temperature medium in the FGD system and its parts, including the fan wheels, dampers, liquid spray, and pipes, can be used with Hastelloy B3 I-Beam. Alloy B3 C-Channel can be cut to size and shape All conventional welding techniques, with the exception of oxyacetylene and submerged arc welding, can be used on alloy B3 chains.

Hastelloy B3 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B335 / ASME B335
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Hastelloy B3 Angle
: 5mm to 9mm
Hastelloy B3 Channel
: 40mm*20mm~300mm*300mm
Hastelloy B3 Beam : 3″ thru 12.31″
Hastelloy B3 Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
B3 Hastelloy Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Al P Fe Mo Ni Cr Ti W V
Hastelloy B3 0.01 max 3.0 max 10 max 0.50 max 1.5 28.5 65.0 min 1.5 0.2 max  3.0 max
Hastelloy B3 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
Equivalent Grades for B3 Hastelloy Angle, Channel, Beam, Chain
Hastelloy B3 2.4600 N10675  
Hastelloy B3 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
B3 Alloy Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)