Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy 925 Channel, Channels, Beams, and Chains. We produce our product with best-in-class materials with the best professional team to fulfill your needs and expectation as per the industry standards. Incoloy 925 H-Beam is commonly used in valves, fasteners, tubing hangers, springs, mandrels, and other similar applications. Incoloy 925 I-Beam is also used in sour gas well surface and down-hole hardware, as well as oil-production equipment. By incorporating aluminum and titanium, Incoloy 925 T-Beam can be age-hardened.

Incoloy 925 Channel Manufacturer In India | Incoloy 925 Channel Manufacturer In Mumbai | Incoloy 925 Channel Exporter In India | Incoloy 925 Channel Exporter In Mumbai | Incoloy 925 Channel Supplier In India | Incoloy 925 Channel Supplier In Mumbai | Incoloy 925 Channel Stockist In India | Incoloy 925 Channel Stockist In Mumbai
Incoloy 925 Channel

Incoloy 925 Channel

Incoloy 925 Chain has comparable corrosion resistance to Incoloy 825 Chain, but with increased strength due to the age hardening process. On the other hand, molybdenum and copper are added to Alloy 925 Angle to increase its resistance to corrosive media. For interrupted cuts, smooth finishing, and closing tolerance, high-speed steel tooling in Alloy 925 C-Channel should be used. Alloy 925 H-Beam is also suitable for use in high-strength piping systems and the petroleum industry.

Alloy 925 I-Beam resists general corrosion, pitting, crevice corrosion, inter-granular corrosion, and stress corrosion cracking in both oxidizing and reducing environments. T-Beam Alloy 925 is commonly found in gas turbine engine parts, wellhead completion equipment, and blowout preventers (BOPs). Because of the nickel content, this alloy is vulnerable to attack at high temperatures in sulfur-containing atmospheres.

Incoloy 925 Angle, Channel, Beam, Chain Specifications
Specifications : ASTM B425 / ASME B425
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Incoloy 925 Angle
: 5mm to 9mm
Incoloy 925 Channel
: 40mm*20mm~300mm*300mm
Incoloy 925 Beam : 3″ thru 12.31″
Incoloy 925 Chain
: 1/8 inch – 1/2 inch Diameter
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
925 Incoloy Angle, Channel, Beam, Chain Chemical Composition
Grade C Mn Si Al S Cr Cu Ni Fe Al
Incoloy 800 0.03 max 1.00 max 0.05 max 0.02 max 0.03 max 19.55-22.50 1.50-3.00 42-46 22.0 min 0.01-0.05 max
Incoloy 925 Angle, Channel, Beam, Chain Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.14 g/cm3 1343 °C MPa – 650 MPa – 300 30%
Equivalent Grades for 925 Incoloy Angle, Channel, Beam, Chain
Incoloy 925 N09925 NCF 925
Incoloy 925 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
925 Steel Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)