Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality of Monel Alloy K500 Coils, Sheets And Plates. A methodically contemporary alloy, our Monel K500 Sheets, is superior performance alloy that paybacks significantly from binary melting in the course of Electro Slag Refining (ESR) method, which ensures the highest and cleanest quality of material is delivered. These Monel K500 Plates is used for sea water impellers and pump shafts, in addition to being used in the oil well industries for valve trim and other parts. When in the age – hard-bitten form, Monel K500 Coils (UNS N05500) has a better tendency in the direction of SCC in some atmospheres than Monel 400 Coils.

Monel Alloy K500 Coils Manufacturer In India | Monel Alloy K500 Coils Manufacturer In Mumbai | Monel Alloy K500 Coils Exporter In India |Monel Alloy K500 Coils Exporter In Mumbai | Monel Alloy K500 Coils Supplier In India| Monel Alloy K500 Coils Supplier In Mumbai | Monel Alloy K500 Coils Stockist In India| Monel Alloy K500 Coils Stockist In Mumbai
Monel Alloy K500 Coils

Monel Alloy K500 Coils

Meanwhile, these Monel K500 Slating Coils are also being offered in different sizes and shapes to our customers. Monel K500 Perforated Coils is a high – chromium nickel alloy having excellent resistance to many corrosive aqueous media and high temperature atmospheres. These Alloy K500 Plates has the highest chromium content (29 % Cr) among nickel alloys suitable for fabrication of pressure equipment, which confers exceptional resistance to oxidizing media.

Alloy K500 Coils are known as high performance alloys, and can be formed in different shapes, which also have good creep and oxidation resistance. In addition to its corrosion resistance, these Alloy K500 Slating Coils has high strength, good metallurgical stability and favorable fabrication characteristics.

Monel K500 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 127
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Monel K500 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni
Monel K500 0.25 max 1.5 max 0.5 max 0.010 max 27.00 – 33.00 0.5 – 2 63.00 min
Monel K500 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 160000 , MPa – 1100 Psi – 115000 , MPa – 790 20 %
Equivalent Grades for K500 Monel Sheets & Plates
Monel K500 2.4375 N05500
Monel K500 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Monel K500 Sheets, Plate & Coils Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)