Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Coils, Sheets And Plates, which resists attack from phosphoric acid and have been successfully used with nitric acid. These Nickel 201 Plates is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. Our Nickel 201 Coils exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite. Like steel, these Nickel 201 Slating Coils is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper.

Nickel Alloy 201 Coils Manufacturer In India | Nickel Alloy 201 Coils Manufacturer In Mumbai | Nickel Alloy 201 Coils Exporter In India | Nickel Alloy 201 Coils Supplier In India | Nickel Alloy 201 Coils Supplier In Mumbai | Nickel Alloy 201 Coils Stockist In India | Nickel Alloy 201 Coils Stockist In Mumbai 
Nickel Alloy 201 Coils

Nickel Alloy 201 Coils

Other metals in contact with our Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel. Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations.

These Alloy 201 Coils are both useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect steel under such conditions), though it provides the greatest level of resistance to corrosion.

Nickel 201 Sheet, Plate & Coil Specifications
Specifications : ASTM / ASME SB 162
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Nickel 201 Plate, Sheet & Coil Chemical Composition
Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min
Nickel 201 Sheets, Plates & Coils Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
Equivalent Grades for 201 Nickel Sheets & Plates
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99
Nickel 201 Sheets, Plate & Coils Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel 201 Sheets, Plate & Coils Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 201 Coils

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Coils, Sheets And Plates, which resists attack from phosphoric acid and have been successfully used with nitric acid.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5