Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy B3 Hydraulic Fittings, which is often encountered in extreme environments. Hastelloy B3 Hydraulic Type Fittings is a non – magnetic, nickel – based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Hastelloy B3 Hydraulic Forged Fittings also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range. The high chromium content of Hastelloy B3 Forged Hydraulic Fittings raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.

Hastelloy B3 Hydraulic Fittings Manufacturer In India | Hastelloy B3 Hydraulic Fittings Manufacturer In Mumbai | Hastelloy B3 Hydraulic Fittings Exporter In India | Hastelloy B3 Hydraulic Fittings Exporter In Mumbai | Hastelloy B3 Hydraulic Fittings Supplier In India | Hastelloy B3 Hydraulic Fittings Supplier In Mumbai | Hastelloy B3 Hydraulic Fittings Stockist In India | Hastelloy B3 Hydraulic Fittings Stockist In Mumbai 
Hastelloy B3 Hydraulic Fittings

Hastelloy B3 Hydraulic Fittings

Alloy B3 Hydraulic Type Fittings exhibits high levels of resistance to stress and salt water, exhaust gases, and most organic acids and compounds. Alloy B3 Hydraulic Forged Fittings is common in gas turbine blades, seals, and combustors, as well as turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, chemical processing and pressure vessels.

Alloy B3 Forged Hydraulic Fittings is not an age hardening alloy and cold working is the only available means of hardening, where further low Sulphur reducing furnace atmospheres should be used in forging. Softening by annealing of Hastelloy UNS N10675 Hydraulic Fittings begins at about 1600 Degree F (871 Degree C), and is reasonably complete after 10 minutes to 15 minutes of heating at 1800 Degree F (982 Degree C).

Hastelloy B3 Hydraulic Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : 1/16” to 2″ inch
Thread : NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc.
Pressure Rating
: 3000 – 6000 PSI
PTFE Standards : ASTM 3294, ASTM D1710
Applicable temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting
Hastelloy B3 Hydraulic Fittings Chemical Composition
Grade Ni Mo Cr Fe W Mn C Al Ti Si
Hastelloy B3 65.0 min 28.5 1.5 1.5 3.0 max 3.0 max 0.01 max 0.50 max 0.2 max 10 max
Hastelloy Alloy B3 Hydraulic Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 40%
Equivalent Grades for Alloy B3 Hydraulic Tube Fittings
STANDARD WERKSTOFF NR. UNS
Hastelloy B3 2.4600 N010675
Hastelloy Alloy B3 Hydraulic Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Hastelloy B3 Hydraulic Tube Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy B3 Hydraulic Fittings

Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy B3 Hydraulic Fittings, which is often encountered in extreme environments. Hastelloy B3 Hydraulic Type Fittings is a non – magnetic, nickel – based high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion. Hastelloy B3 Hydraulic Forged Fittings also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range. The high chromium content of Hastelloy B3 Forged Hydraulic Fittings raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5