Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Hydraulic Fittings, which is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur. Resistance to sulphuric acid is particularly exceptional but these Monel 400 Hydraulic Type Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. Our Monel 400 Forged Hydraulic Fittings has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.

Monel Alloy 400 Hydraulic Fittings Manufacturer In India | Monel Alloy 400 Hydraulic Fittings Manufacturer In Mumbai | Monel Alloy 400 Hydraulic Fittings Exporter In India | Monel Alloy 400 Hydraulic Fittings Exporter In Mumbai | Monel Alloy 400 Hydraulic Fittings Supplier In India | Monel Alloy 400 Hydraulic Fittings Supplier In Mumbai | Monel Alloy 400 Hydraulic Fittings Stockist In India | Monel Alloy 400 Hydraulic Fittings Stockist In Mumbai 
Monel Alloy 400 Hydraulic Fittings

Monel Alloy 400 Hydraulic Fittings

Application of these Alloy 400 Hydraulic Type Fittings could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media. Post weld heat treatment in our Alloy 400 Forged Hydraulic Fittings may not be required for use in some corrosive environments due to resistance to inter – granular corrosion in the as – welded condition. We use a range of transport partners to ship overnight these Nickel-Alloy 400 Hydraulic Fittings within national and international countries.

We offer a full range of logistics solutions for our Nickel-Alloy 400 Hydraulic Type Fittings from priority express services to more cost – effective economy shipments all around the globe. Our brand became the synonymous of the high quality for these Nickel-Alloy 400 Hydraulic Forged Fittings, which provides highly safe and reliable operations.

Monel 400 Hydraulic Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : 1/16” to 2″ inch
Thread : NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc.
Pressure Rating
: 3000 – 6000 PSI
PTFE Standards : ASTM 3294, ASTM D1710
Applicable temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting
Monel 400 Hydraulic Fittings Chemical Composition
Grade C Mn Si S Cu Fe Ni
Monel 400 0.30 max 2.00 max 0.50 max 0.024 max 28.00 – 34.00 2.50 max 63.00 min
Monel Alloy 400 Hydraulic Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Monel 400 8.8 g/cm3 1350 °C (2460 °F) Psi – 80,000 , MPa – 550 Psi – 35,000 , MPa – 240 40 %
Equivalent Grades for Alloy 400 Hydraulic Tube Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Monel 400 2.4360 N04400 NW 4400 NA 13 МНЖМц 28-2,5-1,5 NU-30M NiCu30Fe
Monel Alloy 400 Hydraulic Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Monel 400 Hydraulic Tube Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Monel Alloy 400 Hydraulic Fittings

Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Monel Alloy 400 Hydraulic Fittings, which is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur. Resistance to sulphuric acid is particularly exceptional but these Monel 400 Hydraulic Type Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments. Our Monel 400 Forged Hydraulic Fittings has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5