Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Hydraulic Fittings, which is readily attracted to a magnet. Our Stainless Steel 310H Forged Hydraulic Fittings is a stabilized chromium ferritic stainless steel, combining good corrosion resistance with good formability and weldability. The corrosion resistance of these Stainless Steel 310H Hydraulic Type Fittings enables it to replace grade 304 in less aggressive applications. Our SS 310H Hydraulic Fittings has resistance in a variety of mildly corrosive media, where it also attains its maximum corrosion resistance when in the highly polished or buffed condition.

Stainless Steel 310H Hydraulic Fittings Manufacturer In India | Stainless Steel 310H Hydraulic Fittings Manufacturer In Mumbai | Stainless Steel 310H Hydraulic Fittings Exporter In India | Stainless Steel 310H Hydraulic Fittings Exporter In Mumbai | Stainless Steel 310H Hydraulic Fittings Supplier In India | Stainless Steel 310H Hydraulic Fittings Supplier In Mumbai | Stainless Steel 310H Hydraulic Fittings Stockist In India | Stainless Steel 310H Hydraulic Fittings Stockist In Mumbai 
Stainless Steel 310H Hydraulic Fittings

Stainless Steel 310H Hydraulic Fittings

These 310H Stainless Steel Hydraulic Fittings has excellent resistance to pitting and crevice corrosion in chloride environments. Chloride stress corrosion cracking (SCC) resistance of our Grade 310H Hydraulic Fittings is very high, as it is for all ferritic grades. The resistance of these Type 310H Hydraulic Fittings to acids is generally lower than that of 304, but performance varies for different acids, and these should be considered on a case by case basis.

In our AISI 310H Hydraulic Fittings, heat up to 790 Degree C – 870 Degree C, hold for only a few minutes and then water quench or quickly air cool, where it is important to not exceed 1000 Degree C. Slow cooling in these Stainless Steel UNS S31009 Hydraulic Fittings will cause embrittlement and raise the ductile – to – brittle transition temperature, so should be avoided.

Stainless Steel 310H Hydraulic Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 310H Hydraulic Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
310H 0.10 2.00 1.00 0.045 0.030 26.0 21.0
Stainless Steel 310H Hydraulic Fittings Mechanical Properties
Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Hardness (Brinell)
310H 515 Min 205 Min. 40 Min 217 Max.
Equivalent Grades for 310H Stainless Steel Hydraulic Tube Fittings
Grade UNS  WERKSTOFF NR
310H S31009
SS 310H Hydraulic Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 310H Hydraulic Tube Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 310H Hydraulic Fittings

Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Hydraulic Fittings, which is readily attracted to a magnet. Our Stainless Steel 310H Forged Hydraulic Fittings is a stabilized chromium ferritic stainless steel, combining good corrosion resistance with good formability and weldability. The corrosion resistance of these Stainless Steel 310H Hydraulic Type Fittings enables it to replace grade 304 in less aggressive applications. Our SS 310H Hydraulic Fittings has resistance in a variety of mildly corrosive media, where it also attains its maximum corrosion resistance when in the highly polished or buffed condition.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5