Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Super Duplex S32750 Hydraulic Fittings, which is a solid solution alloy that can be hardened by the process of cold working. The proportions of copper and nickel used to make Super Duplex S32750 Hydraulic Fittings are the same as that found in the nickel ore found in Ontario mines. These Super Duplex S32760 Hydraulic Fittings exhibits good corrosion resistance, where the machinability is difficult as it work – hardens during machining.

Super Duplex S32750 Hydraulic Fittings Manufacturer In India | Super Duplex S32750 Hydraulic Fittings Manufacturer In Mumbai | Super Duplex S32750 Hydraulic Fittings Exporter In India | Super Duplex S32750 Hydraulic Fittings Exporter In Mumbai | Super Duplex S32750 Hydraulic Fittings Supplier In India | Super Duplex S32750 Hydraulic Fittings Supplier In Mumbai | Super Duplex S32750 Hydraulic Fittings Stockist In India | Super Duplex S32750 Hydraulic Fittings Stockist In Mumbai
Super Duplex S32750 Hydraulic Fittings

Super Duplex S32750 Hydraulic Fittings

The conventional machining techniques used on iron alloys may be used for Super Duplex S32750 Hydraulic Type Fittings. Welding methods including gas – arc welding, metal – arc welding, gas – metal – arc welding and submerged – arc welding are recommended on these Super Duplex S32760 Hydraulic Type Fittings. Hot working on Super Duplex S32750 Forged Hydraulic Fittings needs to be done by choosing proper temperatures.

Typical temperatures of these Super Duplex S32760 Forged Hydraulic Fittings have hot working between the ranges of 648 Degree C – 1176 Degree C (1200 Degree F – 2150 Degree F). Super Duplex Steel S32750 Hydraulic Forged Fittings (about 67 % Ni – 23 % Cu) is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. These Super Duplex Steel S32760 Hydraulic Forged Fittings is a solid solution alloy that can only be hardened by cold working.

Super Duplex Steel S32750 / S32760 Hydraulic Fittings Specifications
Specifications : ASTM A182 / ASME SA182
Tube Fittings SIZE : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
: 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
Brass : ASTM B16 ASTM B 453
Ptfe Standards : ASTM D1710, ASTM D3294
Applicable Temperature : 150-400°C
Type : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting
Super Duplex Steel S32750 / S32760 Hydraulic Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min
S32760 0.05 max 1.00 max 1.00 max 0.030 max 0.010 max 24.00 – 26.00 3.00 – 4.00 6.00 – 8.00 0.20 – 0.30 57.61 min
Super Duplex Steel S32760 Hydraulic Fittings Mechanical Properties
Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S32750 / S32760 7.8 0.281 1350 2460
Equivalent Grades for Super Duplex S32750 / S32760 Hydraulic Tube Fittings
STANDARD WERKSTOFF NR. UNS
Super Duplex 2507 1.4410 S32750 / S32760
Super Duplex Steel S32750 / S32760 Hydraulic Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Super Duplex Steel S32750 / S32760 Hydraulic Tube Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)