Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy X Nipple, which is recommended for joining alloy by Gas Tungsten Arc or Gas Metal Arc welding. Coated electrodes of our Hastelloy X Hexagon Reducing Nipple are also available for Shielded Metal Arc welding in non – ASME code construction. For dissimilar metal joining of this Hastelloy X Hexagon Nipple to nickel, cobalt, or iron – base materials, welding products may all be considered, depending upon the particular case. Pre – heat in our Hastelloy X One End Threaded Nipple is not required, where pre – heat is generally specified as room temperature.

Hastelloy X Nipple Manufacturer In India | Hastelloy X Nipple Manufacturer In Mumbai | Hastelloy X Nipple Exporter In India | Hastelloy X Nipple Supplier In India | Hastelloy X Nipple Supplier In Mumbai | Hastelloy X Nipple Stockist In India | Hastelloy X Nipple Stockist In Mumbai | Hastelloy X Nipple Exporter In India | Hastelloy X Nipple Exporter In Mumbai
Hastelloy X Nipple

Hastelloy X Nipple

Inter – pass temperature in these Hastelloy X Both End Threaded Nipple should be maintained below 200 Degree F (93 Degree C). Auxiliary cooling methods in our Hastelloy X Concentric Swaged Nipple may be used between weld passes, as needed, providing that such methods do not introduce contaminants. Post – weld heat treatment is not generally required for this Hastelloy X Eccentric Swaged Nipple, where bright annealed products are cooled in hydrogen.

All greases, oils, cutting oils, crayon marks, machining solutions, corrosion products, paint, scale, dye penetrant solutions, and other foreign matter should be completely removed from our Alloy X Hexagon Reducing Nipple. All cold – reduced sheet and the various weld samples were produced from these Alloy X Hexagon Nipple which had been solution heat – treated prior to cold reduction or welding.

Hastelloy X Nipple
Specifications : ASTM B366, ASTM SB 366, ASTM B564, ASME SB564
Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Size : ½” NB to 24″NB
Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Alloy X Nipple Chemical Composition
Hastelloy X Ni C Mo Mn Si Fe Cu Ti Co Cr
Balance 0.05-0.15 8.0-10.0 1.0 max 1.0 max 17.0-20.0 0.50 max 0.15 max 0.5-2.5 20.5-23.0
Hastelloy X Nipple Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
Equivalent Grades for Hastelloy X Nipple
Hastelloy X N06002 2.4665
Hastelloy X Nipple Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Alloy X Nipple Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)


Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *