Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 410 Nipple, which is used for highly stressed parts where a degree of corrosion resistance, strength and ductility are required. Stainless Steel 410 Hexagon Reducing Nipple may be used for steam turbine buckets, blades, bucket covers, gas turbine compressor blades, nuclear reactor control rod mechanisms, forged valves, fasteners, shafting, pump parts and machine parts.

Stainless Steel 410 Nipple Manufacturer In India | Stainless Steel 410 Nipple Manufacturer In Mumbai | Stainless Steel 410 Nipple Exporter In India | Stainless Steel 410 Nipple Exporter In Mumbai | Stainless Steel 410 Nipple Supplier In India | Stainless Steel 410 Nipple Supplier In Mumbai | Stainless Steel 410 Nipple Stockist In India | Stainless Steel 410 Nipple Stockist In Mumbai 
Stainless Steel 410 Nipple

Stainless Steel 410 Nipple

Stainless Steel 410 Hexagon Nipple can be used up to 1200 Degree F (650 Degree C) where resistance to scaling is required, and readily hot worked by forging and upsetting. SS 410 One End Threaded Nipple may be readily forged, headed or upset, where it requires more blows or a heavier hammer than mild steel. If tempering of Stainless Steel 410 Both End Threaded Nipple in this range is necessary to obtain the desired strength and ductility values, it may be that in many cases the reduced impact strength is not a problem and that the corrosion resistance is only slightly reduced.

SS 410 Concentric Swaged Nipple should be heated uniformly to 2000 Degree F / 2200 Degree F (1095 Degree C / 1205 Degree C), depending upon the degree of deformation, then forged and air cooled. Large forgings should be furnace cooled or cooled in dry lime, and thus SS 410 Eccentric Swaged Nipple should not be forged below 1650 Degree F (900 Degree C).

Stainless Steel 410 Nipple
Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
SS 410 Nipple Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75
Stainless Steel 410 Nipple Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201
Equivalent Grades for 410 Stainless Steel Nipple
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410
Stainless Steel 410 Nipple Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
SS 410 Nipple Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *