Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Pipe Fittings And Other Nickel Alloy Products, which needs to be turned and worked at slow speeds and low feed rates. Nickel 200 Pipe Fittings is an alloy (i.e. combination of two or more elements of which at least one is a metal, and where the resultant material has metallic properties). Nickel 200 Compression Fittings is based on nickel (65 % – 70 %) and also contains iron and manganese (5 %) and other compounds. Nickel 200 Accessories is a very expensive alloy, with cost ranging from five to ten times the cost of copper and nickel.

Nickel Alloy 200 Pipe Fittings Manufacturer In India | Nickel Alloy 200 Pipe Fittings Manufacturer In Mumbai | Nickel Alloy 200 Pipe Fittings Exporter In India | Nickel Alloy 200 Pipe Fittings Exporter In Mumbai | Nickel Alloy 200 Pipe Fittings Supplier In India | Nickel Alloy 200 Pipe Fittings Supplier In Mumbai | Nickel Alloy 200 Pipe Fittings Stockist In India | Nickel Alloy 200 Pipe Fittings Stockist In Mumbai 

Its use is limited to those applications where thus Nickel 200 Ferrule Pipe Fittings cannot be replaced with cheaper alternatives than compared to carbon steel, piping more than three times as expensive. Nickel 200 Double Ferrule Pipe Fittings is notable for its toughness, which is maintained over a considerable range of temperatures. Alloy 200 Accessories is useful at temperatures up to and including 1000 Degree F in oxidizing atmospheres.

Nickel Alloy 200 Pipe Fittings

Nickel Alloy 200 Pipe Fittings

Alloy 200 Compression Pipe Fittings is a solid – solution binary alloy, where higher temperatures may be employed if the alloy is in a reducing environment. As nickel and copper are mutually soluble in all proportions, Alloy 200 Ferrule Pipe Fittings is a single – phase alloy. Alloy 200 Double Ferrule Pipe Fittings is commonly used in applications with highly corrosive conditions.

Nickel 200 Pipe Fittings / Accessories Specifications
Specifications : ASTM B366 ASME SB366
Size : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Ends : Threaded, Welding, JIC
Pressure Rating : 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi
Threads : NPT , BSPT, BSPP
Nickel 200 Pipe Fittings Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min
Nickel 200 Accessories Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
Equivalent Grades for Nickel Alloy 200 Pipe Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2
Nickel 200 Pipe Fittings / Accessories Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel Alloy 200 Pipe Fittings / Accessories Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 200 Pipe Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Pipe Fittings And Other Nickel Alloy Products, which needs to be turned and worked at slow speeds and low feed rates. Nickel 200 Pipe Fittings is an alloy (i.e. combination of two or more elements of which at least one is a metal, and where the resultant material has metallic properties).

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5