Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Pipe Fittings, which show features like good weld – ability and excellent machinability with or without addition filler metals. Our Stainless Steel 310H Compression Pipe Fittings also shows good corrosion resistance to a widespread range of corrosive environments. These Stainless Steel 310H Compression Fittings is effective in many applications where carbon steel, galvanized, aluminized or painted steel or Aluminium give unsatisfactory life. Our SS 310H Ferrule Pipe Fittings is not attacked by strong alkalis, and often gives adequate resistance in mildly acidic conditions.

Stainless Steel 310H Pipe Fittings Manufacturer In India | Stainless Steel 310H Pipe Fittings Manufacturer In Mumbai | Stainless Steel 310H Pipe Fittings Exporter In India| Stainless Steel 310H Pipe Fittings Exporter In Mumbai | Stainless Steel 310H Pipe Fittings Supplier In India | Stainless Steel 310H Pipe Fittings Supplier In Mumbai | Stainless Steel 310H Pipe Fittings Stockist In India | Stainless Steel 310H Pipe Fittings Stockist In Mumbai 

Light surface rust can form in many atmospheres, making these Stainless Steel 310H Double Ferrule Pipe Fittings unsuitable for decorative applications. Our Stainless Steel 310H Accessories is strongly resists chloride stress corrosion cracking, but is less resistant than 304 to pitting and crevice corrosion in chloride environments. These 310H Stainless Steel Compression Pipe Fittings is likely to resist water with chloride contents of up to 100 mg/L to 200 mg/L at ambient temperatures.

Stainless Steel 310H Pipe Fittings

Stainless Steel 310H Pipe Fittings

The presence of sulphide or nitrate ions in our 310H Stainless Steel Compression Fittings will reduce the corrosively of chlorides. These 310H Stainless Steel Ferrule Pipe Fittings offers scaling resistance to 620 Degree C continuous or 730 Degree C intermittent, but if under stress the temperature should be limited to 450 Degree C continuous or 600 Degree C intermittent.

Stainless Steel 310H Pipe Fittings / Accessories Specifications
Specifications : ASTM A182 ASME SA 182
Tube Size : 1/16”OD to 2”OD, 2mm OD to 50mm OD
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 310H Pipe Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
310H min. 0.04 24.0 19.0
max. 0.10 2.0 1.0 0.045 0.030 26.0 21.0
Stainless Steel 310H Accessories Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
310H 515 205 40 95 217
Equivalent Grades for 310H Stainless Steel Pipe Fittings
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
310H S31009 X5CrNi18-10 2332 SUS 310H
SS 310H Pipe Fittings / Accessories Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 310H Pipe Fittings / Accessories Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 310H Pipe Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Pipe Fittings, which show features like good weld – ability and excellent machinability with or without addition filler metals. Our Stainless Steel 310H Compression Pipe Fittings also shows good corrosion resistance to a widespread range of corrosive environments.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US