Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Round Bar, which have up to 8 percent alloying elements and any higher concentration is considered to constitute a high – alloy steel. Stainless Steel 310 Square Bars are manganese, silicon, Aluminium, nickel, chromium, cobalt, molybdenum, vanadium, tungsten, titanium, niobium, where several of these are often added simultaneously to achieve specific properties. Stainless Steel 310S Flat Bars are made up for deep-drawn automobile bodies and appliances made of low – carbon steels, medium – carbon structural steels and plates employed in all kinds of construction, high – carbon railroad rails, and wires at all carbon levels used for hundreds of items.

Stainless Steel 310 Round Bar Manufacturer In India | Stainless Steel 310 Round Bar Manufacturer In Mumbai | Stainless Steel 310 Round Bar Exporter In India | Stainless Steel 310 Round Bar Exporter In India | Stainless Steel 310 Round Bar Supplier In India | Stainless Steel 310 Round Bar Supplier In Mumbai | Stainless Steel 310 Round Bar Stockist In India | Stainless Steel 310 Round Bar Stockist In Mumbai
Stainless Steel 310 Round Bar

Stainless Steel 310 Round Bar

The addition of costly Stainless Steel 310 Threaded Bars begins when combinations of properties are requested that cannot be met by carbon steels. The demand for high strength, good weldability, and higher resistance to atmospheric corrosion is met by Stainless Steel 310S Hollow Bars. New formulations of high – performance Stainless Steel 310 Hexagonal Bars enable carmakers to produce stronger and lighter vehicles that are more energy efficient.

Stainless Steel 310S Triangular Bars have low carbon levels and contain small amounts of one or a combination of elements such as chromium, nickel, molybdenum, vanadium, titanium, and niobium. Stainless Steel 310 Bars offers considerable advantages for the construction of wind turbine towers due to its strength and durability.

SS 310/310S Round Bar Specifications
Specifications : ASTM A276, ASME SA276 / ASTM A479  ASME SA479
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 310/310S Round Bars
: Outside Diameter in the range of 4mm to 500mm
SS 310/310S Bright Bars
: Outside Diameter in the range of 4mm to 100mm
SS 310/310S Hex Bars : 18mm – 57mm (11/16″ to 2-3/4″)
SS 310/310S Square Bars
: 18mm – 47mm (11/16″ to 1-3/4″)
SS 310/310S Flat Bars
: 1/2” to 10” in thickness range of 2mm to 150mm,
Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length : 1 to 6 Meters, Custom Cut Lengths
Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
310/310S Stainless Steel Round Bar Chemical Composition
Grade C Mn Si P S Cr Mo Ni Fe
SS 310 0.015 max 2 max 0.15 max 0.20 max 0.015 max 24-26 0.15 max 19-21 54.7 min
SS 310S 0.08 max 2 max 1.0 max 0.045 max 0.030 max 24 – 26 0.75 max 19 – 21 53.095 min
Stainless Steel 310/310S Rods Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %
Equivalent Grades for 310/310S Stainless Steel Round Bar
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
 SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21
SS 310/310S Round Bar Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
310/310S Steel Rods Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 310 Round Bar

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Round Bar, which have up to 8 percent alloying elements and any higher concentration is considered to constitute a high – alloy steel.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5