Contents
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Round Bar, which often required strengthening because of its low – annealed strength and also tempering is often required to improve hardness and elasticity. Our Stainless Steel 316Ti Square Bars is additionally poor in the area of oxidation resistance; however, it is excellent under stress and corrosion in a variety of salt water, fresh water, brackish water and hydrochloric environments. This Stainless Steel 316Ti Flat Bars offers the same corrosion resistance as nickel, but often is chosen because of its reduced cost and much higher ability to withstand pressures and temperatures.
Stainless Steel 316Ti Round Bar Manufacturer In India | Stainless Steel 316Ti Round Bar Manufacturer In Mumbai | Stainless Steel 316Ti Round Bar Exporter In India | Stainless Steel 316Ti Round Bar Exporter In Mumbai | Stainless Steel 316Ti Round Bar Supplier In India | Stainless Steel 316Ti Round Bar Supplier In Mumbai | Stainless Steel 316Ti Round Bar Stockist In India | Stainless Steel 316Ti Round Bar Stockist In Mumbai
Combined with its high workability and strength, our Stainless Steel 316Ti Threaded Bars is often chosen for engineering applications. Additionally, these Stainless Steel 316Ti Hollow Bars is nonmagnetic, and the chromium component of its makeup also provides better resistance to oxidation than pure nickel. Our Stainless Steel 316Ti Hexagonal Bars can only be hardened by cold – working practices, making it ideal for welding, brazing and soldering.
These Stainless Steel 316Ti Triangular Bars is also all but immune to chlorine, where its flexible nature is due largely in part to its ability to withstand corrosion. Our Stainless Steel 316Ti Bars is capable of keeping its structural integrity under a number of conditions. These Stainless Steel 316Ti Rods is applicable across a wide range of temperatures and environments, remaining resistant to neutral and alkaline conditions.
SS 316Ti Round Bar Specifications |
||
Specifications | : | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
SS 316Ti Round Bars |
: | Outside Diameter in the range of 4mm to 500mm |
SS 316Ti Bright Bars |
: | Outside Diameter in the range of 4mm to 100mm |
SS 316Ti Hex Bars | : | 18mm – 57mm (11/16″ to 2-3/4″) |
SS 316Ti Square Bars |
: | 18mm – 47mm (11/16″ to 1-3/4″) |
SS 316Ti Flat Bars |
: | 1/2” to 10” in thickness range of 2mm to 150mm, |
Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Length | : | 1 to 6 Meters, Custom Cut Lengths |
Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
316Ti Stainless Steel Round Bar Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 316Ti | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 16 – 18 | 2.0-3.0 | 10.0-14.0 | 68.395 min |
Stainless Steel 316Ti Rods Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 316Ti Stainless Steel Round Bar
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 316Ti | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
SS 316Ti Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
316Ti Steel Rods Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 316Ti Round Bar
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Round Bar, which often required strengthening because of its low – annealed strength and also tempering is often required to improve hardness and elasticity.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
Stainless Steel 316Ti Round Bar
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Round Bar, which often required strengthening because of its low – annealed strength and also tempering is often required to improve hardness and elasticity.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments