Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Socket Weld Fittings, which has very good resistance to pitting and stress corrosion cracking. These Hastelloy B2 Forged Socket Weld Elbow Fittings is an additional member of the Ni – Mo – family of alloys with a special chemistry designed to achieve a level of thermal stability greatly superior to that of other alloys. The improved thermal stability of Hastelloy B2 Forged Socket Weld Tee Fittings minimizes the problems associated with the fabrication of components. These Hastelloy B2 Forged Socket Weld Cap Fittings finds application under both oxidizing and reducing conditions especially in hot phosphoric acid, sulphuric acid, and as a material of construction for gas scrubbers in flue – gas desulphurization units.

Hastelloy B2 Socket Weld Fittings Manufacturer In India | Hastelloy B2 Socket Weld Fittings Manufacturer In Mumbai | Hastelloy B2 Socket Weld Fittings Exporter In India | Hastelloy B2 Socket Weld Fittings Exporter In Mumbai | Hastelloy B2 Socket Weld Fittings Supplier In India | Hastelloy B2 Socket Weld Fittings Supplier In Mumbai | Hastelloy B2 Socket Weld Fittings Stockist In India | Hastelloy B2 Socket Weld Fittings Stockist In Mumbai
Hastelloy B2 Socket Weld Fittings

Hastelloy B2 Socket Weld Fittings

Further important characteristics of Hastelloy B2 Forged Socket Weld Coupling Fittings are magnetic and magneto strictive properties and high thermal and electrical conductivity in grades having low gas content. This is due to the reduced tendency to precipitate deleterious intermetallic phases in these Hastelloy B2 Forged Socket Weld Cross Fittings, thereby, providing lower loss of ductility during and following various heat treating operations.

Hastelloy B2 Forged Socket Weld Union Fittings has low carbon content, which should permit its use in the as-welded condition. In addition, these Hastelloy B2 Forged Socket Weld Plug Fittings has improved corrosion resistance to many non – oxidizing acidic environments (Acetic, Formic, and Hydrochloric acids).

Hastelloy B2 Forged Socket weld Fittings Specifications
Specifications : ASTM B564 & ASME B564
Size : 1/8” NB to 4” NB
Standards
: ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket weld Fittings
Hastelloy Alloy B2 Forged Socket weld Fittings Chemical Composition
Grade C Mn Si P S Co Mo Ni Fe Cr
Hastelloy B2 0.02 max 1.00 max 0.1 max 0.04 max 0.03 max 1.00 max 26.0-30.0 Balance 2.00 max 20.00 – 22.50
Hastelloy Alloy B2 Socket weld Fitting Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
9.2 g/cm3 1370 °C (2500 ºF ) Psi – 1,10,000 , MPa – 760 Psi – 51000 , MPa – 350 40 %
Equivalent Grades for B2 Hastelloy Alloy Forged Socket weld Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Hastelloy B2 2.4617 N10665
Hastelloy B2 Forged Socket weld Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Hastelloy Alloy B2 Forged Socket weld Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)