Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Brass Tube to Female Fittings, which can also be used in slightly chlorinated and desaereted water. Brass Tube Fittings performs well in oil and gas applications where desaereted and low hydrogen sulphide exist. However, Brass Compression Fittings is prone to chloride attack, particularly in oxidizing conditions. Brass Compression Tube Fittings operates well in environments requiring moderate corrosion resistance and high mechanical properties. Brass Female Connector Fittings resists oxidation up to 1292 Degree F (700 Degree C) continuously and up to 1500 Degree F (816 Degree C) on an intermittent basis.

Brass Tube to Female Fittings Manufacturer In India | Brass Tube to Female Fittings Manufacturer In Mumbai | Brass Tube to Female Fittings Exporter In India | Brass Tube to Female Fittings Exporter In Mumbai | Brass Tube to Female Fittings Supplier In India | Brass Tube to Female Fittings Supplier In Mumbai | Brass Tube to Female Fittings Stockist In India | Brass Tube to Female Fittings Stockist In Mumbai
Brass Tube to Female Fittings

Brass Tube to Female Fittings

Brass Ferrule Fittings is typically done in the 1382 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) range followed by air cooling. For smaller deformation such as bending, preheating of Brass Double Ferrule Fittings should be done in the 212 Degree F – 572 Degree F (100 Degree C – 300 Degree C) temperature range.

Brass Ferrule Tube Fittings is best machined in the annealed condition at surface speeds, where post machining decontamination and passivation are recommended. Brass Double Ferrule Tube Fittings is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Tooling of Brass Tube Fittings should consist of tungsten carbide designations or cobalt type high speed tools.

Brass Tube to Female Pipes Specifications
Specifications : ASTM B135 ASME SB135 / ASTM B36 ASME SB36
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Brass, 300/1000/3000PSI
Brass Tube to Female Pipes Fitting Chemical Composition
Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 2.7 35.4
Brass Tube to Female Pipes Fitting Physical Properties
Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi
Brass Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Brass Tube to Female Pipes Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Brass Tube to Female Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Brass Tube to Female Fittings, which can also be used in slightly chlorinated and desaereted water. Brass Tube Fittings performs well in oil and gas applications where desaereted and low hydrogen sulphide exist. However, Brass Compression Fittings is prone to chloride attack, particularly in oxidizing conditions.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US