Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Tube to Male Fittings, which is the absorption and removal of the two gases hydrogen and nitrogen. Hydrogen can enter liquid in these Stainless Steel 310 Tube Fittings from moist air, damp refractories, and wet flux and alloy additions. Our Stainless Steel 310S Compression Fittings causes brittleness of solidified steel — especially in large pieces, such as heavy forgings, that do not permit the gas to diffuse to the surface. Hydrogen in these Stainless Steel 310 Male Connector Fittings can also form blowholes in castings, where like hydrogen, element of nitrogen substantially decreases the ductility of steel.

Stainless Steel 310 Tube to Male Fittings Manufacturer In India | Stainless Steel 310 Tube to Male Fittings Manufacturer In Mumbai | Stainless Steel 310 Tube to Male Fittings Exporter In India | Stainless Steel 310 Tube to Male Fittings Exporter In Mumbai | Stainless Steel 310 Tube to Male Fittings Supplier In India | Stainless Steel 310 Tube to Male Fittings Supplier In Mumbai | Stainless Steel 310 Tube to Male Fittings Stockist In India | Stainless Steel 310 Tube to Male Fittings Stockist In Mumbai
Stainless Steel 310 Tube to Male Fittings

Stainless Steel 310 Tube to Male Fittings

Nitrogen in Stainless Steel 310S Ferrule Tube Fittings does not move into and out of liquid steel as easily as hydrogen, but it is well absorbed by liquid steel in the high – temperature zones of an electric arc or oxygen jet, where nitrogen molecules (N2) are broken up into atoms (N). These Stainless Steel 310 Double Ferrule Tube Fittings takes place in containers lined with basic refractories.

Our SS 310S Tube Fittings may be bricks or ram material made of highly stable oxides, such as magnetite, alumina, or the double oxides chrome – magnetite and dolomite. These SS 310 Compression Fittings is desirable that the refractories not participate in the steelmaking reactions, but unfortunately they do erode and corrode.

Stainless Steel 310/310S Tube to Male Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 310/310S Tube To Male Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min
Stainless Steel 310/310S Tube To Male Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %
Equivalent Grades for 310/310S Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21
SS 310/310S Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 310/310S Tube To Male Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 310 Tube to Male Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Tube to Male Fittings, which is the absorption and removal of the two gases hydrogen and nitrogen. Hydrogen can enter liquid in these Stainless Steel 310 Tube Fittings from moist air, damp refractories, and wet flux and alloy additions.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5