Contents
- 0.1 Stainless Steel 310H Tube to Male Fittings Manufacturer In India | Stainless Steel 310H Tube to Male Fittings Manufacturer In Mumbai | Stainless Steel 310H Tube to Male Fittings Exporter In India | Stainless Steel 310H Tube to Male Fittings Exporter In Mumbai | Stainless Steel 310H Tube to Male Fittings Supplier In India | Stainless Steel 310H Tube to Male Fittings Supplier In Mumbai | Stainless Steel 310H Tube to Male Fittings Stockist In India | Stainless Steel 310H Tube to Male Fittings Stockist In Mumbai
- 0.2 Stainless Steel 310H Tube to Male Fittings Specifications
- 0.3 SS 310H Tube To Male Fittings Chemical Composition
- 0.4 Stainless Steel 310H Tube To Male Fittings Mechanical Properties
- 0.5 Equivalent Grades for 310H Stainless Steel Ferrule Fitting Tube To Male Fittings
- 0.6 SS 310H Tube To Male Fittings Application Industries
- 0.7 Stainless Steel 310H Tube To Male Fittings Test Certificates
- 0.8 Material Testing
- 0.9 We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
- 0.10 Documentation
- 1 Stainless Steel 310H Tube to Male Fittings
- 2 Stainless Steel 310H Tube to Male Fittings
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Tube to Male Fittings, which is considered resistant at ambient temperatures and reducing to about at 60 Degree C. Our Stainless Steel 310H Tube Fittings is equivalent to Grade 310 in the annealed condition and superior if the application involves service in the 425 Degree C – 900 Degree C range. These Stainless Steel 310H Compression Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 50 Degree C. This treatment in our Stainless Steel 310H Male Connector Fittings follows normal solution treatment, where heat up to approx.
Stainless Steel 310H Tube to Male Fittings Manufacturer In India | Stainless Steel 310H Tube to Male Fittings Manufacturer In Mumbai | Stainless Steel 310H Tube to Male Fittings Exporter In India | Stainless Steel 310H Tube to Male Fittings Exporter In Mumbai | Stainless Steel 310H Tube to Male Fittings Supplier In India | Stainless Steel 310H Tube to Male Fittings Supplier In Mumbai | Stainless Steel 310H Tube to Male Fittings Stockist In India | Stainless Steel 310H Tube to Male Fittings Stockist In Mumbai
870 Degree C – 890 Degree C for thickness and air cool. Stabilization of these Stainless Steel 310H Ferrule Tube Fittings is recommended for most severe service conditions (above 425 Degree C) and particularly for material annealed at the upper side of the annealing temperature range. Our Stainless Steel 310H Ferrule Double Ferrule Tube Fittings combines excellent service properties at high temperatures by means of ease of fabrication.
These Alloy 310H Tube Fittings resists oxidation at temperatures up to 1150 Degree C and can provide superior service to Grade 304 in carbon, nitrogen and Sulphur containing atmospheres. Although not designed for aqueous corrosion resistance, the high chromium and nitrogen content gives our SS 310H Male Connector Fittings pitting resistance approximating that of 316.
Stainless Steel 310H Tube to Male Fittings Specifications |
||
Specifications | : | ASTM A276 ASME SA 479 |
Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Brass | : | ASTM B16 ASTM B 453 |
Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 310H Tube To Male Fittings Chemical Composition
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 310H | 0.04 – 0.10 | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | – | 19.00 – 21.00 | 53.885 min |
Stainless Steel 310H Tube To Male Fittings Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40% |
Equivalent Grades for 310H Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 310H | – | S31009 | – | – | – | – | – |
SS 310H Tube To Male Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Stainless Steel 310H Tube To Male Fittings Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Stainless Steel 310H Tube to Male Fittings
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Tube to Male Fittings, which is considered resistant at ambient temperatures and reducing to about at 60 Degree C. Our Stainless Steel 310H Tube Fittings is equivalent to Grade 310 in the annealed condition and superior if the application involves service in the 425 Degree C – 900 Degree C range.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
Stainless Steel 310H Tube to Male Fittings
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310H Tube to Male Fittings, which is considered resistant at ambient temperatures and reducing to about at 60 Degree C. Our Stainless Steel 310H Tube Fittings is equivalent to Grade 310 in the annealed condition and superior if the application involves service in the 425 Degree C – 900 Degree C range.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments