Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 321 Tube to Male Fittings, which is available at best price. Stainless Steel 321 Tube Fittings has increased resistance to scaling and intergranular corrosion (versus 304 / 316 material) due mainly to its added titanium content. Titanium addition in Stainless Steel 321H Tube Fittings eliminates the formation of chromium carbides at the grain boundaries by tying up the carbon and nitrogen as titanium carbides or nitrides. While processing only stainless tools like steel brushes in Stainless Steel 321 Compression Tube Fittings, pneumatic picks and so on are allowed, in order to not endanger the passivation.

Stainless Steel 321 Tube to Male Fittings Manufacturer In India | Stainless Steel 321 Tube to Male Fittings Manufacturer In Mumbai | Stainless Steel 321 Tube to Male Fittings Exporter In India | Stainless Steel 321 Tube to Male Fittings Exporter In Mumbai | Stainless Steel 321 Tube to Male Fittings Supplier In India | Stainless Steel 321 Tube to Male Fittings Supplier In Mumbai | Stainless Steel 321 Tube to Male Fittings Stockist In India | Stainless Steel 321 Tube to Male Fittings Stockist In Mumbai
Stainless Steel 321 Tube to Male Fittings

Stainless Steel 321 Tube to Male Fittings

Stainless Steel 321H Compression Tube Fittings is similar to stainless steel 304, but with higher nickel content and stabilized with titanium. Welding should be carried out using Stainless Steel 321 Male Connector Fittings or similar electrodes or rods (depending upon application), where no pre heat or post heat is generally required. Stainless Steel 321H Male Connector Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60 °C.

Stainless Steel 321H Ferrule Fittings can be used in up to 10 % diluted solutions at elevated temperatures. Stainless Steel 321 Double Ferrule Fittings cannot be hardened by heat treatment, only by cold working, where it can also be easily welded and processed by standard shop fabrication practices.

Stainless Steel 321/321H Tube to Male Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 321/321H Tube To Male Fittings Chemical Composition
Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max
Stainless Steel 321 Tube To Male Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
Equivalent Grades for 321 Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9
SS 321/321H Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 321/321H Tube To Male Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 321 Tube to Male Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 321 Tube to Male Fittings, which is available at best price. Stainless Steel 321 Tube Fittings has increased resistance to scaling and intergranular corrosion (versus 304 / 316 material) due mainly to its added titanium content.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5