Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 446 Tube to Male Fittings, which is available in different specifications as per clients’ requirements. The microstructure of Stainless Steel 446 Tube Fittings consists of about 50 % of the hard intermetallic Laves phase dispersed in a softer cobalt alloy matrix. Stainless Steel 446 Compression Fittings provides the material with exceptional metal to metal wear bearing properties, where follow annealing by stabilization and aging treatments. The high levels of molybdenum and chromium present in Stainless Steel 446 Male Connector Fittings favours the formation of the high hardness phase and also provide a high level of corrosion resistance.

Stainless Steel 446 Tube to Male Fittings Manufacturer In India | Stainless Steel 446 Tube to Male Fittings Manufacturer In Mumbai | Stainless Steel 446 Tube to Male Fittings Exporter In India | Stainless Steel 446 Tube to Male Fittings Exporter In Mumbai | Stainless Steel 446 Tube to Male Fittings Supplier In India | Stainless Steel 446 Tube to Male Fittings Supplier In Mumbai | Stainless Steel 446 Tube to Male Fittings Stockist In India | Stainless Steel 446 Tube to Male Fittings Stockist In Mumbai
Stainless Steel 446 Tube to Male Fittings

Stainless Steel 446 Tube to Male Fittings

The phase of Stainless Steel 446 Ferrule Fittings itself has a 2840 Degree F melting point, which helps to retain its wear resistance to high temperatures. Mechanical properties of Stainless Steel 446 Double Ferrule Fittings vary with the solution and aging treatments, where shapes are available per customer requirements. Higher solution temperatures of 446 Stainless Steel Male Connector Fittings result in better room temperature ductility and elevated temperature creep – rupture strength.

Lower solution temperatures in 446 Stainless Steel Tube Fittings give higher tensile strengths, where short time hot tensile strength is inferior at temperatures up to 1350 Degree F. The creep – rupture strength of 446 Stainless Steel Compression Fittings is superior to that of alloy 718 at temperatures above 1150 Degree F – 1200 Degree F.

Stainless Steel 446 Tube to Male Fittings Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass
SS 446 Tube To Male Fittings Chemical Composition
Grade C Mn Si P S Cr Mo Ni N Fe
SS 446 0.2 max 1.5 max 0.75 max 0.04 max 0.030 max 23 – 30 0.50 max 0.10 – 0.25 Balance
Stainless Steel 446 Tube To Male Fittings Mechanical Properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.5 g/cm3 1510 °C (2750 °F) Psi – 75,000 , MPa – 485 Psi – 40,000 , MPa – 275 20 %
Equivalent Grades for 446 Stainless Steel Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 446 1.4762 S44600
SS 446 Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Stainless Steel 446 Tube To Male Fittings Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 446 Tube to Male Fittings

Ninthore Overseas is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 446 Tube to Male Fittings, which is available in different specifications as per clients’ requirements. The microstructure of Stainless Steel 446 Tube Fittings consists of about 50 % of the hard intermetallic Laves phase dispersed in a softer cobalt alloy matrix

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5
Send us your Enquiry

Send us your requirements and we shall get back to you soon.

    X
    CONTACT US