Ninthore Overseas is one Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel T2 Tubes, which is equally suitable for use in jet engine tailpipes, afterburner components, turbine blades, nozzle vanes, cabin heaters, and other aircraft parts. Of several materials evaluated in an atmosphere of hydrogen, nitrogen and ammonia at 1100 Degree F and 25, 00 psi, these Alloy Steel T2 Seamless Tubes had a nitride case less than one – fourth as thick as the closest competitive material without inter – granular attack. Carbide tools of our Alloy Steel T2 Welded Tubes should have smaller angles than high – speed tools, where operating speeds can be higher.

Alloy Steel T2 Tubes Manufacturer In India | Alloy Steel T2 Tubes Manufacturer In Mumbai | Alloy Steel T2 Tubes Exporter In India | Alloy Steel T2 Tubes Exporter In Mumbai | Alloy Steel T2 Tubes Supplier In India | Alloy Steel T2 Tubes Supplier In Mumbai | Alloy Steel T2 Tubes Stockist In India | Alloy Steel T2 Tubes Stockist In Mumbai 
Alloy Steel T2 Tubes

Alloy Steel T2 Tubes

Thoroughly clean work piece is recommended in these Alloy Steel T2 EFW Tubes after machining to prevent surface contamination in the course of subsequent heat treating, where further chlorine additives would be an alternative. Our Alloy Steel T2 ERW Tubes is one of the most widely used nickel base super – alloys for gas turbine engine components. These Alloy Steel T2 Round Tubes has no yield or tensile strength requirements, but it does require a hardness maximum and stress rupture minimums.

Our Alloy Steel T2 Square Tubes is a solid solution strengthened grade has good strength and oxidation resistance up to 2200 Degree F (1200 Degree C). Since the rate of cooling has no effect on the softening, these Alloy Steel T2 Rectangular Tubes may perhaps be water quenched or air cooled.

Alloy Steel T2 Seamless Tubes Specifications
Specifications : ASTM A/ASME SA213, A691
Dimensions : ASTM, ASME and API
Tubes Size
: 1 / 2” OD up to 5” OD, customs diameters also available
Outer Diameter : 6-2500mm; WT:1-200mm
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / EFW / Fabricated
Form : Round, Square, Rectangular, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End : Plain End, Beveled End, Treaded
T2 Alloy Steel Tube Chemical Composition
Grade
C≤
Mn
P≤
S≤
Si≤
Mo
T2
0.10~0.20
0.30~0.61
0.025
0.025
0.10~0.30
0.44~0.65
Alloy Steel T2 Tubes Mechanical Properties
Grade Tensile Strength, MPa Yield Strength, MPa Elongation, % Hardness, HB
T2 415 min 205 min 30 min 163 max
Alloy Steel T2 Seamless Tube Outside Diameter and Tolerance
Outside Diameter OD Tolerance WT Tolerance Ovality Tolerance Cut Length Tolerance
OD≤ 12, 7 mm ± 0, 13 mm ± 15 % + 3, 18 mm, – 0 mm
12, 7 mm < OD ≤ 38, 1 mm ± 0, 13 mm ± 10 % max, 1, 65 mm + 3, 18 mm, – 0 mm
38, 1 mm < OD ≤ 88, 9 mm ± 0, 25 mm ± 10 % max, 2, 41 mm + 4, 76 mm, – 0 mm
Alloy Steel T2 Seamless Tubes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
T2 Alloy Steel A213 Tube Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Alloy Steel T2 Tubes

Ninthore Overseas is one Of The Leading Manufacturer And Exporter Of High Quality Alloy Steel T2 Tubes, which is equally suitable for use in jet engine tailpipes, afterburner components, turbine blades, nozzle vanes, cabin heaters, and other aircraft parts. Of several materials evaluated in an atmosphere of hydrogen, nitrogen and ammonia at 1100 Degree F and 25, 00 psi, these Alloy Steel T2 Seamless Tubes had a nitride case less than one – fourth as thick as the closest competitive material without inter – granular attack.

Product Brand: Ninthore Overseas

Product In-Stock: InStock

Editor's Rating:
5