Contents
- 0.1 Nickel Alloy 200 Tubes Manufacturer In India | Nickel Alloy 200 Tubes Manufacturer In Mumbai | Nickel Alloy 200 Tubes Exporter In India | Nickel Alloy 200 Tubes Exporter In Mumbai | Nickel Alloy 200 Tubes Supplier In India | Nickel Alloy 200 Tubes Supplier In Mumbai | Nickel Alloy 200 Tubes Stockist In India | Nickel Alloy 200 Tubes Stockist In Mumbai
- 0.2 Nickel Alloy 200 Tubes Specifications
- 0.3 200 Nickel Alloy Tube Chemical Composition
- 0.4 Nickel 200 Tubing Mechanical Properties
- 0.5 Equivalent Grades for 200 Nickel Seamless and Welded Tubes
- 0.6 Nickel 200 Seamless / Welded Tubes Application Industries
- 0.7 Nickel Alloy 200 Tube Test Certificates
- 0.8 Material Testing
- 0.9 Documentation
- 1 Nickel Alloy 200 Tubes
- 2 Nickel Alloy 200 Tubes
Ninthore Overseas is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tubes, which is commercially pure (99.6 %) wrought nickel. Nickel 200 Seamless Tubes (UNS N02200) is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Nickel 200 Welded Tubes can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel 200 ERW Tubes. Hot working temperatures of Nickel 200 ERW Tubes should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F.
Nickel Alloy 200 Tubes Manufacturer In India | Nickel Alloy 200 Tubes Manufacturer In Mumbai | Nickel Alloy 200 Tubes Exporter In India | Nickel Alloy 200 Tubes Exporter In Mumbai | Nickel Alloy 200 Tubes Supplier In India | Nickel Alloy 200 Tubes Supplier In Mumbai | Nickel Alloy 200 Tubes Stockist In India | Nickel Alloy 200 Tubes Stockist In Mumbai
Annealing in Nickel 200 Round Tubes should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature in Nickel 200 Square Tubes for this can greatly influence the mechanical properties and structure of the material. When operating temperatures are expected to exceed 600 Degree F, carbon content in Nickel 200 Rectangular Tubes becomes critical.
The lower carbon content of Nickel 200 Electropolish Tubes makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel 200 Instrumentation Tubes are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel 200 High Pressure Tubes has good mechanical properties and excellent resistance to many corrosive environments.
Nickel Alloy 200 Tubes Specifications |
||
Specifications | : | ASTM B161, B622 / ASME SB163, B730 |
Dimensions | : | ASTM, ASME and API |
Alloy 200 Tubes Size |
: | 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk. |
Schedule | : | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Type | : | Seamless / ERW / Welded / Fabricated / LSAW Tubes |
Form | : | Round, Square, Rectangular, Hydraulic Etc |
Length | : | Single Random, Double Random & Cut Length. |
End | : | Plain End, Beveled End, Treaded |
200 Nickel Alloy Tube Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min | – |
Nickel 200 Tubing Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for 200 Nickel Seamless and Welded Tubes
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Nickel 200 Seamless / Welded Tubes Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Nickel Alloy 200 Tube Test Certificates
We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Nickel Alloy 200 Tubes
Ninthore Overseas is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tubes, which is commercially pure (99.6 %) wrought nickel. Nickel 200 Seamless Tubes (UNS N02200) is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Nickel 200 Welded Tubes can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel 200 ERW Tubes. Hot working temperatures of Nickel 200 ERW Tubes should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
Nickel Alloy 200 Tubes
Ninthore Overseas is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 200 Tubes, which is commercially pure (99.6 %) wrought nickel. Nickel 200 Seamless Tubes (UNS N02200) is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Nickel 200 Welded Tubes can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel 200 ERW Tubes. Hot working temperatures of Nickel 200 ERW Tubes should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F.
Product Brand: Ninthore Overseas
Product In-Stock: InStock
5
0 Comments