Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Carbon Steel AISI 1018 Channel , Angle and other Carbon Steel Products. Our AISI 1018 Carbon Steel C-Channel is used extensively in maritime applications and other non-oxidizing chloride solutions because of its resistance to a variety of corrosive situations. Carbon Steel AISI 1018 steel is highly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. This AISI 1018 Carbon Steel Angle has exceptional resistance to stress-corrosion cracking in most freshwaters and a low corrosion rate in quickly flowing brackish or seawater.

Carbon Steel AISI 1018 Channel Manufacturer In India | Carbon Steel AISI 1018 Channel Manufacturer In Mumbai | Carbon Steel AISI 1018 Channel Exporter In India | Carbon Steel AISI 1018 Channel Exporter In Mumbai | Carbon Steel AISI 1018 Channel Supplier In India | Carbon Steel AISI 1018 Channel Supplier In Mumbai | Carbon Steel AISI 1018 Channel Stockist In India | Carbon Steel AISI 1018 Channel Stockist In Mumbai 
Carbon Steel AISI 1018 Channel

Carbon Steel AISI 1018 Channel

This AISI 1018 Carbon Steel Chain is swiftly attacked by nitric acid and ammonia systems, as would be expected given its high copper content. This type of failure in our AISI 1018 Carbon Steel I-Beam is typically caused by a chloride-containing environment as well as stress, water, dissolved oxygen, and other causes. As the nickel content of our AISI 1018 Carbon Steel H-Beam is increased, the tendency of austenitic alloys to split trans-granularly in chloride solutions reduces.

These AISI 1018 Carbon Steel T-Beam provide quicker machining rates, longer tool lives, greater product quality, and lower overall machining costs. After soaking at forging temperature for 30 minutes per inch of billet or ingot section thickness, our AISI 1018 CS Angle is forged between 2250°F and 1750°F (1230°C and 955°C). The most widely used grade of low carbon steel in the world, AISI 1018, provides a good balance of toughness, strength, and ductility. It offers shaped, machined, welded, and constructed steel with ease even if its mechanical characteristics are not very distinctive. The finest steel for carburized parts is AISI 1018 steel because of its great weldability and ability to make a consistent, tougher casing. It can be hardened using surface-hardening techniques like carburizing. It can be carburized to reach the standard surface hardness of HRC 58.

Carbon Steel AISI 1018 Angle, Channel, Beam, Chain Specifications
Specifications : AISI A1018
Dimensions : EN, DIN, JIS, AISI, BS, ASME, AISI
Carbon Steel AISI 1018 Angle
: 5mm to 9mm
Carbon Steel AISI 1018 Channel
: 40mm*20mm~300mm*300mm
Carbon Steel AISI 1018 Beam : 3″ thru 12.31″
Carbon Steel AISI 1018 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain
AISI 1018 Angle, Channel, Beam, Chain Chemical Composition
Grade Mn S C P Si Cr Mo
AISI 1018 0.4-0.8 0.04 0.28-0.33 0.035 0.15-0.35 0.8-1.1 0.15-0.25
Carbon Steel AISI 1018 Angle, Channel, Beam, Chain Mechanical Properties
Grades Tensile Strength (ksi) min Elongation (% in 50mm) min Yield Strength 0.2% Proof (ksi) min Hardness
AISI1018 675 12 400 229
Equivalent Grades for AISI 1018 Angle, Channel, Beam, Chain
STANDARD WERKSTOFF NR. UNS
AISI 1018 1.0453 G10180
Carbon Steel AISI 1018 Angle, Channel, Beam, Chain Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
AISI 1018 Steel Angle, Channel, Beam, Chain Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 


0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *