Ninthore Overseas is one of the leading manufacturer and exporter of Inconel 625 Washers, which resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Inconel 625 Flat Washer is often used in spray bars, turbine shroud rings, bellows and heat – exchanger tubing in environmental control systems. Inconel 625 Lock Washer is non – magnetic and immune to chloride ion stress corrosion cracking, where they form in a needle – like morphology and are incoherent with the matrix. The nickel and chromium content in Inconel 625 Sealing Washers provide resistance to oxidizing environments.

 Inconel Alloy 625 Split Washer is also used in Flue gas desulfurization scrubbers and Weld Overlay. Inconel 625 Slot Washers is as well used in is used in chemical processing, marine engineering, aerospace, pollution – control equipment, nuclear reactor applications and so on. The oxidation and scaling resistance of Alloy 625 Machine Washers is superior to a number of heat resistant austenitic stainless steels such as in Grade 304, Grade 309, Grade 310 and Grade 347 up to 1800 Degree F (982 Degree C) and under cyclic heating and cooling conditions.

Inconel 625 Washers | Inconel 625 Washers | Inconel 625 Washers | Inconel 625 Washers | Inconel 625 Washers | Inconel 625 Washers | Inconel 625 Washers | Inconel 625 Washers | Inconel 625 Washers

 Inconel Alloy 625 Star Washer has high resistance to oxidation at elevated temperatures up to 1050 Degree C, which is also supplied in the hot worked and annealed condition. These Inconel 625 Spring Washers is a nickel – chromium – molybdenum – niobium alloy with excellent resistance to a variety of corrosive media.

Inconel 625 Washer Specifications
Specifications : ASTM B446
Standard : DIN, ASTM, BS and all International Standards
Length : M02 to M33
Size : 3 mm to 200 mm
Type : Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring

Inconel 625 Washers Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr
Inconel 625
0.10max 0.50 max 0.50 max 0.015max 5.0 max 58.0 min 20.0 – 23.0

Alloy 625 Washer Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 625
8.4 g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Equivalent Grades for Inconel Alloy 625 Washer

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 625
2.4856 N06625 NCF 625 NA 21 ХН75МБТЮ NC22DNB4M NiCr22M

 

Alloy 625 Washers Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

625 Inconel Washers Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)


0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published. Required fields are marked *