Ninthore Overseas Is One Of The Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Wire Mesh, which allows being matched for corrosion resistance with the austenitic and ferritic steel grades. Stainless Steel 304 Hexagonal Wire Mesh is always important to assess the suitability of a particular with full knowledge of the corrosive environment. Structures of SS 304 Welding Wire Mesh in swimming pools are known to be prone to SCC. The use of standard austenitic SS 304 Netting Wire Mesh is forbidden in several applications. The advantage of high-strength Stainless Steel 304 Woven Wire Mesh immediately becomes a disadvantage when considering formability and machinability.

Stainless Steel 304 Wire Mesh Manufacturer In India | Stainless Steel 304 Wire Mesh Manufacturer In Mumbai | Stainless Steel 304 Wire Mesh Exporter In India | Stainless Steel 304 Wire Mesh Exporter In Mumbai | Stainless Steel 304 Wire Mesh Supplier In India | Stainless Steel 304 Wire Mesh Supplier In Mumbai | Stainless Steel 304 Wire Mesh Stockist In India | Stainless Steel 304 Wire Mesh Stockist In Mumbai 
Stainless Steel 304 Wire Mesh

Stainless Steel 304 Wire Mesh

The high strength of Spring Steel Wire Mesh also comes with lower ductility than austenitic grades. Due to their high chromium content, Fencing Wire Mesh offers excellent corrosion resistance in many media. SS 304 Wire Mesh has very limited use in hydrochloric acid because of the risk of uniform and localized corrosion. High–alloyed steels such as 304 SS Wire Mesh can be used in dilute hydrochloric acid.

The resistance to pitting and crevice corrosion of Hexagonal Wire Mesh increases with the content of chromium, molybdenum and nitrogen in the steel. However, Welding Wire Mesh is convenient to use the Pitting Resistance Equivalent Number to rank the grades, where there is no single measure of corrosion resistance.

Does Stainless Steel Mesh Rust?

Rust is caused by the oxidation of iron. Stainless steel does not contain enough iron for oxidation to occur. This means stainless steel will not rust, but it can still be scratched, which can lead to corrosion. The best way to maintain stainless steel is with regular cleaning and drying. Wiping it down with a damp cloth or even a mild soap should do the trick. Make sure to dry it thoroughly to avoid any water spots or discoloration.

SS 304 Wire mesh Specifications
Specifications : ASTM A 164 ASME SA 164
Standard : DIN, ASTM, BS and all International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wiremesh, Welding Wiremesh, Netting Wiremesh, Woven Wiremesh , Spring Steel wire mesh, Fencing Wiremesh etc.
304 Stainless Steel Wire Mesh Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
304 min. 18.0 8.0
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10
Stainless Steel 304 Wiremesh Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201
Equivalent Grades for 304 Stainless Steel Wiremesh
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304
SS 304 Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
304 Steel Wiremesh Test Certificates

We at Ninthore Overseas provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Ninthore Overseas ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test


• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)